Applications

Sprayidea 92 stick and stay spray adhesive Industrial Multipurpose Spray Adhesive is suitable for bonding all kinds of light materials such as paper, fabric, foam, plastic, acrylic etc. Especially in composites applications, it plays a significant role in bonding carbon fiber and fiberglass in temporary positioning

molding process.

Features

1.Temporay & permanent bonding available;

2.Free of formaldehyde, benzene and chlorinated solvent, environment

-friendly, non-toxic;

3.Spraying coverage is 2 times larger than similar products;

4.Two different nozzles offer different effects to meet various requirements;

5.High solid content, excellent performance. 

Instruction

• Keep the surface clean and dry, No oil and water.
• Please shake well before use, to achieve the best effect.
• Evenly spray the glue for a distance of 15-30 cm to the adhesive surface.
• After using please keep the can down, spray about 2 to 3 seconds to avoid nozzle clogged, the best temperature of using this product is 15℃~35℃.
• Clean nozzle with alcohol or other solvents if clogged.

Caution

• Pressurized packing, may be explosive in high temperature. Keep well-ventilated, avoid the glue contacting with skin when using.
• Should be stored in well-ventilated, dark, cool, dry place.
• Do not store above 49℃, recommended storage at below 30℃.
• Keep the children away from it ,spray the adhesive out completely before you throw it away.
• When the adhesive contacted with skin or eyes, please clean with water. Serious please go to the doctor immediately.