> Dimension: 55x40.2x19.1mm> Voltage: DC12V> Current: 40mA> Time: 0~30S
EL-350D (Without Signal Output)> Voltage: DC12V and DC24V (adjustable)> Current Draw: 12V/300mAx2 24V/150mAx2> Lock Size: 340Lx41Wx21H(mm)> Armature plate: 130Lx33Wx9.3H(mm)> Holding force: 180KGx2 (350lbsx2)
> Card type: EM Card> User Capacity: 1000 users (Standard)> User Capacity: 6000 users (Optional)> Read 125KHz EM Card (Standard)> Read 13.56MHz Mifare Card (Optional)> Open Mode: Card or PIN> Card reading distance: 1~5cm
> Card type: EM Card> Full programming from the keypad> WG26 Input/output> 2000 uses, supports Card, PIN, Card + PIN> Digital backlit keypad> Red, Yellow, and Green LEDs display the working status
EM-22: ID Thin CardsEM-23: ID Thick CardsMF-26: IC Thin CardsMF-27: Philips IC Thin cardUC-1: Ultralight CardsFor Printing Purpose: ID Card with Coating ID Card without Coating
> Power Supply: DC12V; DC24V> Operation Delay Time: 0sec., 2.5sec., 5sec., 9sec.> Holding forces: 600lbs> Weight: 3kg
> Card type: EM Card> Access ways: Card, code, card + code, Mobile APP> Protocol: Wiegand26 Input/Output> Searching time: Less than 0.1s after reading card> Backlight keypad: Easy to operate at night> Doorbell interface: Support external wired doorbell
> Card Type: EM Card > Metal case, anti-vandal > Digital backlit touch keypad > Multi-function standalone access controller and reader, > WG interface: WG26 Input / output > Capacity: 2000 cards / codes
> Card type: EM Card> Waterproof conforms to IP66> One relay, 1000 users> Wiegand 26~37 bits input & output> User data can be transferred by Wiegand line> Access modes: Card, PIN, Card + PIN, Multi Cards/PINs> Card type: 125KHz Hid & EM card, PIN length: 4~6 digits> Pulse mode, toggle mode> 2pcs device support interlock for two doors
> Holding Force: 60KG(100Lbs)> Voltage: DC24V> lock size: 114Lx35Wx23H(mm)> Armature plate: 75Lx31Wx10H(mm)
> Holding Force: 60KG(100Lbs)> Voltage: DC12V> lock size: 114Lx35Wx23H(mm)> Armature plate: 75Lx31Wx10H(mm)
>Sensing distance: 50-70mm>Switch form: NO-Normally Open/NC-Normally Close/NO+NC
> User capacity: 500> Communication: RS485 port> Dimension: 145x80x30mm> Working with master machine TFS30 only
> Card type: 125KHz or 13.56MHz Card> PCD-104EM: 125KHz (WG26 output)> PCD-104Mifare: 13.56MHz (WG34 output)
> Card Type: EM Card> Storage: 4000 users> Working frequency: 125KHz> Operating voltage: DC12V> Wiegand 26 Input and Output
> Card type: EM or MF Card> Metal case, anti-vandal> WG26 Input/output> Three accesses: card, pin, card+pin> Digital backlit keypad> Doorbell support and interface: button and circuit segregate, any doorbell can be connected
> PCD series is available for OEM and ODM. KR series is not allowed> Delivery terms: EXW factory> This is RFID card reader only, need to work with ACB series Control board> Delivery time: If under 500pcs/model, within 2-3working days once confirmed
> Input Voltage: AC110~240V> Input Frequency: 50~60Hz> Output Voltage: DC12V> Output Current: 5A
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
Door position detection and bolt position (N.C. & N.O.)output points> Power Supply: DC12V> Operation current: 880mA