> Card reading distance: 0~3M> Output Interface: WG26,WG34,RS485> Operating Voltage: DC12V 80MA> Size: 121x78x22mm
> Holding Force: 60KG(100Lbs)> Voltage: DC24V> lock size: 79Lx40Wx23H(mm)> Armature plate: 75Lx31Wx10H(mm)
> Power supply: DC12-24V> Locking start current: 980mA> Quiescent Current: 200mA> Security type: Power on lock
> Dimensions: 36x34x20mm> Material: High quality elements with superb design> Suitable for Door: Externally-connected electronic lock of access controller> Output Capability: Dry contact output> Max. overload: 10A/250VAC 10A/30VDC
> Card type: EM Card > Plastic case > Digital backlit touch keypad > Multi-function standalone access controller and reader, > WG interface: WG26 Input / output > Capacity: 2000 cards / codes
Water-resistant, ABS plastic material, 125KHz. EM card.> Check sport type: RFID> Working frequency: 125KHz. EM> Battery: None, passive tag> Size: 70x70x10mm
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
> Built in LED, door sensor and time delay> Single door 350KG=800lbs> Voltage: DC12V and DC24V(adjustable)> Holding Force: 380KG(800Lbs)> Current Draw: 12V/500mA 24V/250mA
> 433MHz Rolling Code technology> Card type: 13.56MHz Mifare card> Programmable Wiegand output of the> Receiver: 26 bits or 34 bits> Communication distance: 30m maximum> Ultra-low power consumption> Waterproof, conforms to IP65
>Card type: Mifare-13.56MHz>Fingerprint Capacity: 100>Password / Cards Capacity: 1000 Users>Fingerprint Sensor: Semiconductor Fingerprint Sensor>Operating Voltage: 12V>Recognition Speed: <=0.3s
> GPS tracking, locating patrol site> GPRS real time data transmission> Flashlight+2.0 mega pixels camera> Electronic railing, intrusion alarm> 5 modes LED lighting> Display: TFT 1.8 ' High-definition color display
EM-22: ID Thin CardsEM-23: ID Thick CardsMF-26: IC Thin CardsMF-27: Philips IC Thin cardUC-1: Ultralight CardsFor Printing Purpose: ID Card with Coating ID Card without Coating
EL-350D (Without Signal Output)> Voltage: DC12V and DC24V (adjustable)> Current Draw: 12V/300mAx2 24V/150mAx2> Lock Size: 340Lx41Wx21H(mm)> Armature plate: 130Lx33Wx9.3H(mm)> Holding force: 180KGx2 (350lbsx2)
> Without door position detection output> Voltage: DC12V or DC24V> Holding Force: 180kg(350Lbs)> Current Draw: 12V/480mA 24V/240mA
>Sensing distance: 50-70mm>Switch form: NO-Normally Open/NC-Normally Close/NO+NC
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
> Panel: Aluminium magnesium alloy> Handle: 304 Stainless Steel> Colors: Silver/Golden/Red Bronze/Wooden Heart Mix> Surface treatment: PVD/drawing
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
