> Input Voltage: AC100-260V> Output Voltage: DC12V 5A

> Card type: EM, MF, Card> Metal Case, anti-vandal> Waterproof conforms to IP66> One relay(Pulse mode, toggle mode)> APP supports Android 4.3 and IOS7.0 above> Compatible with all Bluetooth-enabled mobile phones (version: 4.0 above)

> Face Plate: 200X34X42mm> Strike Plate: 90X25X3mm> Lock Cylinder: 15mmX15mm> Working Voltage: DC12V> Start working: 450mA

> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell

> Supply power: AC/DC 12~30V> Reaction time: Relay output<45ms> Dimension: 186x175x53mm> Detection mode: Receive the open signal by the truncation of infrared ray which operated by foot> Widely be used in the operating room of hospital and laboratory to prevent hand pollution

> Material: Metal> Storage capacity: 80,000 pcs> Impact storage capacity: 32,000 logs> Size: 130x40x25mm

> Card type: 125KHz or 13.56MHz Card> KR503EM: 125KHz (WG26 output)> KR503Mifare: 13.56MHz (WG34 output)

> Display: 2.8 inches> Fingerprint Users: 1000> Attendance Records: 100,000> Communication: USB> Dimension: 160*130*30mm

> Card Type: MF or MF Card> 1000user capacity (Support RFID+Pincode)> Voltage: DC12V> Touch-screen keypad

> Material Selection: High Strength Aluminum, Sandblast Finished> Suitable for Door: In-swing Door> Opening Mode: 90° Degrees Door> Finished for Shell: Anodized aluminum

> PCD series is available for OEM and ODM. KR series is not allowed> Delivery terms: EXW factory> This is RFID card reader only, need to work with ACB series Control board> Delivery time: If under 500pcs/model, within 2-3working days once confirmed

> Card Type: EM Card > Metal case, anti-vandal > Digital backlit touch keypad > Multi-function standalone access controller and reader, > WG interface: WG26 Input / output > Capacity: 2000 cards / codes

>WG26/WG34 adjustable by end user under reader mode>Capacity: 2000 users,button keypad>Access Way: Pin, Card,Pin+ Card>Relay Toggle Mode,Pure Reader Mode ,Standalone Access Control Mode .>Data backup

> Card type: EM or MF> Waterproof Degree: IP68> Transmit format: WG26/WG34> Ultra- low power consumption: Standby current less than 30mA> Fast Searching speed: Time is less than 0.1S between reading card and opening the door

> Reading Method: Auto-induction> Sensor Frequency: 125kHz EM ID tag> Material: ABS plastic+rubber handle> Direction: LED+Vibration> Storage capacity: 80,000pcs> Impact record capacity: 32,000pcs> Battery: 1200 mAh built-in li-ion(rechargeable) battery

> 2,100 users, user data can be transferred> Multi-access modes: Card, Card or PIN, Card with PIN and multi Cards/PINs> Can connect with any reader with Wiegand 26~37 bits output> Can connect with any keypad reader with 4bits, 8bits (ASCII), or 10bits Virtual number output> Support Master Card function> Support set principal card

> Two Accesses: Fingerprin, Pincode> Waterproof, conforms to IP66 > Metal case, anti-vandal > One Programming relay output > Multi-color LED Status Display> PIN length: 4~6 digits> Integrated alarm & Buzzer output> Capacitive Fingerprint Sensor>1000 Users: 100 Fingerprint, 890 PIN, 10 Visitor Users

> Material: Metal> Storage capacity: 800,000 logs> Impact(drop) storage capacity: 32,000 logs> Size: 130x40x25mm

> Card type: EM, HID, MF, CPU Card> Wiegand Reader> Standalone for single door> Standalone for two doors> With external reader for two doors> Two units interlocked for two doors> Anti-passback for single door> Anti-passback for two doors

> Waterproof conforms to IP66> Wiegand 26~37 bits output (default: 26bits)> Card type: Hid card, EM card & Mifare card> Reading range: 7 cm> External LED Control & External Buzzer Control