SE700 Kliplock Clamp Solution is widely used and perfectly matched in solar pv plant installation of Lysaght 700 Roof, It can incease the height by adding L Feet Kit on it to enlarge the spacing between solar panel and roof, which can promote up the efficiency of solar power generation.
Why choose SOEASY SE700 Kliplock Clamp Solution?
SE700 KLIPLOCK is specially designed for installation solar modules on Lysaght 700 Roof Type. It has adopted
EPDM rubber in the clamp to avoid the damage of roof profile surface when installation and ensure the strength
with the roof in case of some roof type are deformed. Therefore, SE700 Kliplock Clamp Solution is widely used in
commercial solar project installation all over the world.
Benefits:
1. No roof penetration
2. More than 10 engineers with high technical degree
3. Tested material under extremely corrosive condition
4. More than 10 years experiences in solar industry.
Material |
AL 6005-T5/SUS304 |
Surface Treatment |
Average Anodizing Coating Thickness≥ 10μm Average |
Panel Type |
Framed & Frameless |
Wind Load |
≤60m/s |
Snow Load |
1.4KN/m2 |
Panel Orientation |
Landscape/Portrait |
Tilt Angle |
0°~60° |
Seismic Load |
Lateral Seismic Factor: Kp=1; Seismic Coefficient: Z=1; Use Coefficient: I=1 |
Standards |
JIS C 8955 : 2017 |
AS/NZS 1170 |
|
DIN1055 |
|
ASCE/SEI 7-05 |
|
International Building Code: IBC 2009 |
|
Warranty |
10 Years Quality Warranty, 25 Years Life Span Warranty |