S-Series Sensorless BLDC Drive
BLDC series non-inductive driver is a universal brushless DC motor speed regulating driver. Equipped with 485 communication interface to realize communication control of the driver. The driver has an onboard USB to TTL serial port chip, allowing customers to monitor/modify parameters using a universal Micro-USB cable.
Typical application: Production line,Li-on battery equipment,Solar energy equipment,3C electrical equipment.
Technical Specification
Working voltage S200: DC input voltage 18VDC~48VDC, recommended working voltage 24VDC~48VDCS400: DC input voltage 18VDC~48VDC; recommended working voltage 24VDC~48VDC
It has over-current, over-voltage, under-voltage and other protection functions, and the optional output alarm prompts the on-board USB to serial port chip, which can be connected and debugged using an ordinary Micro-USB data cable.
1.The acceleration and deceleration of the speed command can be set
2.Using FOC magnetic field positioning technology and SVPWM technology
3.Supports potentiometer speed adjustment or 0~5V analog input signal
4.3 digital inputs/1 digital output interface with configurable functions
Environmental condition
Items | Description | ||||
Using ambient temperature | -20 to 50°C(not frozen) | ||||
Store temperature | Below 20%to 90%RH (no condensation | ||||
humidity | -20~60°C(maximum temperature guaranteed:80°C 72 hours | ||||
Storage humidity | Below 20%to 90%RH (no condensation | ||||
Wibration | Up to 49m/s2 | ||||
lmpact | Under 490 m/s2 | ||||
Level of protection | IP54 | ||||
Altitude | Below 1000m |
RS485 communication port
Signal name | Pin number | Features | |||||
Communication signal |
RS485+ | 1 | RS485 communication port | ||||
RS485 | 2 | ||||||
GND | 3 | ||||||
Reserved | 4 | Hold,do not connect | |||||
5 | |||||||
6 | |||||||
7 | |||||||
8 |
Control signal wiring instructions
Features | Symbols | nstructions | ||||||
Power input port | VDC | nput the positive DC power:+24V to+48V | ||||||
GND | Input DC source:OV | |||||||
Motor wire port | U | Motor power line U phase | ||||||
V | Motor power line Vphase | |||||||
W | Motor power line Wphase | |||||||
Control signal port |
COM24V | 24V control signal input common end (Note 24V and 5V input can only be selec | ||||||
EN/(IN1) | External command pulse input port/(universal digital input port 1) | |||||||
F/R/(IN2) | External instruction direction input port/(universal digital input port 2) | |||||||
BREAK/(IN3) | External Enable input port /(Universal digitalinput port 3) | |||||||
COMOV | Control signal output common end:OV | |||||||
ALM/(OUT1) | Control signal output common end:OW |
Product Display
FAQ
Can we accept samples customized?
No problem for samples order, and welcome your testing before your big order.
OEM and ODM are available?
Yes, we accept customized products
Can I get a lower price if I order large quantities?
Yes, Cheaper prices with bigger size orders, please contact us and we will give you a quatation.