Advantages of Automatic Quick-change C purlin machine :
1. Automatically change different purlin size in one minute, without changing rollers or spacers.
2. Post-cutting design, no worry about twist and flare caused by Pre-cutting design.
3. With computer controlled system which easy to operate and save time and cost .
4. Post-cutting system or fly-cutting for option.
We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts.
Product specification:
| Bottom width (W) | 100-300mm | |||||
| Heigh(H) | 40-100mm | |||||
| Small side(E) | 10-20mm | |||||
| Material width(λ) | 185-525mm | |||||
| Material thickness(&) | Q235（1.5-3.0mm) | |||||
| Embossing way | Embossing with "一" | |||||
| Chain size | 1.5 inch + 1.75 inch + 2.0 inch | |||||
| Main shafts diameter | φ80/65mm Round steel with quenching and tempering treatment | |||||
| Levelling shaft diameter | solid rollers φ105mm（upper2,down3） | |||||
| Wall panel thickness | 25mm | |||||
| Machine base size | H396*199 | |||||
| Driving power | motoer 30KW | |||||
| Punching and cutting power | ||||||
| Forming speed | 30m/min without punching | |||||
| No. of punching | 3 sets（double+double+single）14*25 | |||||
| Changing way | Unlimited change 0.37/0.75KW | |||||
| Punching and cutting mode | Pre punching and cutting + Post cutting | |||||
| roller material | Cr12 | |||||
| Forming station | 4+5+5=14 Stations (without embossing） | |||||
| Blade material | Cr12Mov, Heat treatment after wire cutting | |||||
| Control mode | PLC（Taiwan FATEK） | |||||
Main features：
1. Feeding material guide and leveling device
With feeding material guide and leveling device.
Two rollers (one up and one down roller) for material guide and 5 rollers ( 2 up and 3 down rollers ) for straightening.
Solid and shafts diameter=φ94mm
2. Pre-punching system
Three set of pre-punching devices (one for single hole and 2 for dual-holes.)
Also, can make as customer’s requires.
3. C purlin machine rollers and shafts
Rollers manufactured from bearing steel GCr15, precision machined, hard Chrome Coated;
Shafts manufactured from #45 steel or Gcr15 for optional, Main Shaft Diameter=φ80/65mm, quenching and tempering treated
4. C purlin machine post-cutting system:
No need to change cutter for different size; Unlimited specification changing for height and bottom width;
Cutting blades made by high quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding
5.Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA, Encoder brand: Japan Koyo/OMRON)
6.Uncoiler
C purlin machine uncoiler
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton
7. C purlin exit rack
Un-powered, three units
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
