Mainly used for the utilization of waste composite membranes to make finished products in different shapes

The amount of clean film and greenhouse film is very large. The one-step extrusion injection molding special equipment developed by us saves the granulation process, uses less people, and our brother has a small area.

The non-clean waste plastic film must be cleaned and squeezed to be used before it can be used to produce pallets, hoarding boxes and other products with an extrusion injection molding machine.

The non-clean waste plastic film must be cleaned and squeezed to be used before it can be used to produce pallets, hoarding boxes and other products with an extrusion injection molding machine.

The amount of clean hard plastic waste is very large. The one-step extrusion injection molding special equipment developed by us saves the granulation process, uses less people, and our brother has a small area.

The non-clean hard waste plastic must be cleaned and squeezed to be used before it can be used to produce pallets, hoarding boxes and other products with an extrusion injection molding machine.

With the continuous increase of the world's population and the large-scale use of plastics, the amount of waste plastics in the ocean is increasing, which seriously affects the survival and growth of marine life; marine waste plastics must be used well. It must be cleaned and pelletized during use, and then the product can be made with extrusion injection molding equipment. .

The composition of marine ropes is more complicated. It must be shredded and pelletized to make the plastic uniformly mixed and initially plasticized, and then use extrusion injection equipment to make the product.

As the world's population continues to increase, the amount of plastic in fishing nets is increasing. Fishing nets are mainly made of PA, PP, and PE. They must be cleaned and pelletized when used. Then, PP, PE and PA are mixed through the same direction flat double-step extrusion injection molding machine to make the product.

According to years of research and development experience, a certain amount of plastic must be added to waste textiles in order to be used. In order to combine plastic and waste textiles uniformly, waste textiles must be pelletized and then added to special equipment to make pallets and other products.

Waste textiles are widely present in our lives. I have overcome many difficulties and developed waste spinning indoor and outdoor profile equipment, which can be used for outdoor planking, tables and chairs, garbage bins, etc.

Waste spinning, especially cotton spinning, is very difficult if it is used by screw extrusion. Heating is easy to carbonize, which affects product quality. For this reason, cotton spinning must be crushed, carded, needle punched, tiled, glued, and pressed. Way to make decorative plates.

Plastics have been widely used all over the world, and garbage plastics are everywhere. How to use it is a big problem. The equipment we developed can be made of plastic bricks to make houses; tiles; pedestrian plank boards, etc. The process is simple, the operation is convenient, the floor space is small, and it can be produced locally.

The plastic building materials market has huge potential, and waste plastics can be made into different building materials products, such as: building bricks can be used to make houses; manhole covers, septic tanks, building templates, etc.