The design of the UCPA series ball Bearing unit also has a certain degree of self-aligning, easy to install, with double structure sealing device, which can work in harsh environment. UCPA bearing block is generally cast. Other common types of bearing housing are UCP, UCF, UCFS, UCFC, UCFL, UCT etc.

UCPH bearing is a type of bearing unit. This bearing unit is also a combination of PH bearing housing and pillow block bearing. UCPH bearing seat is much higher than other types of bearing housing, mainly used in special installation environment. The bearing housing is mainly made of cast iron, and stainless steel and plastic materials are used less than cast iron. The pillow block bearing is the same with the other types of mounted bearings unit.

UCFB..A Standard duty,Flange bracket,Inch-based housing,Wider inner ring bearing,Setscrew locking,Cast gray iron housing .

The insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone

Although its basic performance is similar to that of deep groove ball bearing, most of the bearings are used in relatively rough machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole is neutral, or the shaft is long and the deflection is large, and the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the bearing is relatively the same specification Deep groove ball bearings are subject to considerable discount.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °. The characteristic is that the jackscrew is used to Jack the shaft when cooperating with the shaft, and then it has a fixed effect. However, the cooperation environment needs to have a small oscillation scale.

Insert ball bearings are preferred for applications requiring simple equipment and components, such as agricultural machinery, transportation systems, or construction machinery.

It is mainly used to bear the combined radial and axial load mainly based on the radial load.

The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.

Insert ball bearing With eccentric sleeve, its code is: UEL200 series, UEL300 series, SA200 series. The main feature of this kind of ball bearing is that there is a certain eccentricity at the upper end of the bearing, and the eccentric sleeve with the same eccentricity cooperates with it.

Proper amount of lubricant is not required to be cleaned before installation, and lubricant is not required to be added. When the jacking screw on the protruding end of the bearing inner ring is fastened on the shaft, the allowable axial load shall not exceed 20% of the rated dynamic load.

Our complete product line includes: 1. Disc harrow Flange 2. Agricultural machinery bearings include round, square, hexagon socket and hexagon socket

Bearing: o The widest range of industry-standard inner diameter sizes and style options o Improved raceway geometry improves thrust and bending moment load capacity o Super-precision raceways and advanced balls are used to improve accuracy and extend service life

Agricultural machinery bearings are specially designed for harsh environments in farming, seeding or lawn care applications. These bearings include single lip (F or G), double lip or triple lip seal options that have been joined to thick gauge steel shrouds to provide protection in the most demanding environments. FQN's performance and reliability have been verified by rigorous internal and independent laboratory tests.

The FQN agricultural machinery bearing series offers the industry's widest range of standard inner diameter sizes and style options. The series includes Conrad bearings for flange installations, disk harrow bearings with round and square holes, hexagon socket bearings, 200 and select 300 series bearings and 4-point contact Gothic arc single and double row Bearings (with heavy-duty contact seals). These bearings are designed for various working conditions from mild to harsh environments.

Application range: ·Agriculture-combine harvesters, tillage equipment, hay bales, lawn mower regulators, cotton pickers, drilling machines, planters / seeders, wheel bearings, disc bearings ... ·Lawn & Garden-Mower wheels and main shaft. ·Conveyor-grain, aggregate

UCP series Pillow Block Mounted Bearing Unit: Two bolt, pillow block, mounted bearing units, cast iron housing, inch or metric dimensioned shaft sizes.

UCP200 series Pillow Block Mounted Bearing Unit: Two bolt, pillow block, mounted bearing units, cast iron housing, inch or metric dimensioned shaft sizes.