Product introduction: 130 Purple Red
brown, with red copper or champagne color, red gold on the front, yellow on the side, lighter
Model NO. | M-130P | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | Meklon | HS Code | 320820 |
Passionate Fuchsia 1K Paint Reflects The Beauty Of The Car
1K purple red car paint color characteristics: purple red, the front and side are purple, bluish, the front is bright, the side is dark, dark
Fuchsia is a symbol of life, vitality, health, enthusiasm, vigor, and joy. Red is used in car paint to give people a feeling of youthful vitality, enthusiasm, and positivity, regardless of men, women, and children. Red is a common color for fashion, especially for women's fashion and children's clothing, so purple-red cars are very temperamental.
If you like fuchsia cars, take a look at our car paints!
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback