Shop at Easfe for quality fiber optic transceivers suppliers, our supplier focused on development and manufacture for the commercial and industrial grade 400G, 200G, 100G, 50G, 40G, 25G, 10G, 1.25G optical transceiver, and 3G/ 12G for optical transceiver and more.
The products used in IDC data centers, super-computing datacenters, 5G networks(fronthoul, midhaul, backhaul), OTN/PTN, optical network switch,and other environmental applications.
All Compatible Cisco, Huawei, H3C, Brocade, Ubiquit, Mikrotik, Intel, Fortinet, Netgear, D-Link, TP-Link, Broadcom, Zyxel, DELL, ZTE, Ruijie, Mellanox, HPE, aruba ...... Best China supplier for optical transceiver. Approved ISO9001,IS20000 quality system certification and ROHS, CE, FCC, TUV certification. Warranty:3 years; Factory price!
IL<2.7dB ,100GHZ DWDM OADM MUX DEMUX Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Drop and add multiplexing of 8 channels on dark fiber networks Passive device, no power supply, no cooling Supports metro, regional and long-haul DWDM networks
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
100G QSFP28 SR4 100m 850nm MPO optical transceiver, supporting 100Gb/s and 100m MM fiber transmission, it is suitable for high-speed IDC connectivity solutions, etc.
The 100G QSFP28 ZR4 optical transceiver module, which supports 100Gb/s and up to 80km SM fiber transmission, it is suitable for high-speed IDC connectivity solutions, and more.
IL<3.5dB , 100GHZ DWDM MUX DEMUX Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optical devices Multiplexing of 16 channels over dark fiber network Passive device, no power supply, no cooling Suitable for metro, regional and long-haul DWDM networks
Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Multiplexing of 16 Channels over a Dark Fiber Network IL<3.5dB , 100GHZ DWDM MUX DEMUX Passive devices, No Power No Cooling Required Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Support Metro, Regional and Long Haul DWDM Networks
IL<3.5dB , 100GHZ DWDM MUX/DEMUX, Multiplexing of 9 channels on a single fiber With red and blue filters for long distance applications Passive device, no power supply, no cooling required Supports metro, regional and long-haul DWDM networks
Support 40G/100G LR4, ER4, ZR4, dual fiber to single fiber Operating wave 1310nm (40G/100G LWDM 4 or CWDM 4) TX/RX LC connector, LINE SC/APC Passive devices, low insertion loss
CWDM MUX DEMUX, multiplexing up to 8 channels for single fiber BIDI transmission 1% monitoring port for signal analysis or troubleshooting Passive, transparent to Ethernet, FC, OTN, SONET/SDH and other protocols Fully compatible with all ITU-T 1G/10G/25G CWDM optics Applications in metro, regional CWDM networks
IL<2.4dB , 100GHZ DWDM MUX DEMUX Passive device, no power supply, no cooling Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optics Monitor port for troubleshooting, 1310nm port for legacy traffic Multiplexing of 8 channels over dark fiber networks Supports metro, regional and long-haul DWDM networks
Low power consumption Low EMI design Full duplex 4 channel 850nm parallel active optical cable Highly reliable 850nm VCSEL technology Electrically hot-pluggable Digital diagnostic QSFP+ MSA compliant QSFP+ MSA, Up to 4x10Gb/s, 40G RoHS/CE/FCC Compliant
The 100G QSFP28 ER4 optical transceiver module, which supports 100Gb/s and up to 40km SM fiber transmission, it is suitable for high-speed IDC connectivity solutions, and more.
Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability Single-channel 3-port FWDM filter for FTTH/FTTx optical networks
Support IEEE802.3x full dual-voltage and semi-dual-voltage flow control. Comply with IEEE802.3af&at standard, the maximum PoE power of single port is 30W. High reliability protection level, adapting to various complex environments.
FW104GPS-2F is an industrial grade full Gigabit managed POE switch, which provides 4 Gigabit POE ports and 2 Gigabit optical ports. Provide users with perfect security mechanism, supporting IEEE 802.1x, Radius, Tacacs+, etc. Complete POE power supply function, supporting 802.3af/at standard and built-in high-power power supply to meet the requirements of POE scenarios such as security monitoring, wireless coverage and IP telephony.
IL<2.4dB , 100GHZ 8CH DWDM MUX DEMUX Fully compatible with all ITU-T 1G/10G/25G/40G/100G DWDM optics Passive device, no power supply, no cooling Multiplexing of 8-channel DWDM over dark fiber networks Supports metro, regional and long-haul DWDM networks
CWDM MUX DEMUX, multiplexing up to 8 channels on a fiber pair Fully compatible with all ITU-T 1G/10G/25G CWDM optical devices Passive, transparent to Ethernet, FC, OTN, SONET/SDH and other protocols Suitable for metro and regional CWDM networks
Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Multiplexing of 8 Channels over a Dark Fiber Network IL<2.4dB , 100GHZ DWDM MUX DEMUX Monitor Port for Troubleshooting, 1310nm Port for Legacy Traffic Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
DWDM R B Filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Excellent reliability and stability
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
