72 Cell Monocrystalline 17.4% Maximum Efficiency 25-linear power output warranty

The solar panel water clamp is a rectangular self-fastening rubber buckle made of polymer, which solves the drainage problem of the module. Size: 50mm 45mm, 40mm, 35mm, 30mm, 25mm;

JNTECH Solar Off Grid Power System The system is composed of PV module, Solar Off grid inverter, MPPT charge controller and Battery pack. Solar Off grid inverter is core device of PV power sysem, it converts DC power produced by solar panels to AC power to provide electric energy for applications. MPPT charge controller charge the solar electricity into batteries. When solar energy is not enough for loads, or at night, the battery pack will be discharge to replenish energy for loads.

Steel solar rail is made of high quality Q235 galvanized steel

FGET BATTERY - The Most Trusted And Highest Reviewed Sealed Lead Acid Batteries BATTERY TYPE - 12 Volt 12 Amp 20 Hour Sealed Lead Acid Battery With F2 Style Terminals

Al 6005 T5 Solar Panel Mounted clamp End Clamp solar panel clamps.

Multi-use. Made of ABS plastic, UV resistant and environment friendly. Safely bonded to the surface regardless to drill holes using Sikaflex-252. Protect corners of solar panel from damage. Mounts also act as a wind deflector and maintain the correct air gap between the solar panel and the roof top / deck. A variety of options on color and cost.

DA SERIES Solar PV connectors obtained ul6703 / TUV rheintand / DEKRA iec62852 certification, 1500V DC system.

Widely using of the most popular and mature type of modules for on grid or used off grid for residential, commercial or community. All our panels are TUV and CE Certified,have a 25 years warranty.

Solar SE-01 Tile Hook Solution is one of the tile roof solution which is made of aluminum and sus fasteners. It is fixed by fastener which are different from steel tile hook. Therefore, the main parts of aluminum can be the same and it is easy to extend to different roof hooks. Therfore, it is widely used in European market since it easy to do stock and lighter than steel.

FGET SL 2V long service Series delivers trouble free ultra-long life, with a designed life of 20 years.Presence of optimum levels of Tin, calcium, and aluminum along with special grain refiners ensure a long-performance.

The stainless steel solar hooks are simple to install and designed for maximum convenience for tile roof solar panel attachment.

12V 0.8Ah Lifepo4 Lithium-ion Battery Pack For smart-tech toys,tech toys vehicle,RC Cars,Trucks,Buggy,tech toys for kids

The 1000V DC solar fuse connector is simple and convenient to install on site, and the IP67 protection level ensures higher connection safety.

With 182mm Bifacial Solar Monocrystalline Silicon Tarnsparent MBB Module Panel, Sunpal BiMAX5 144 Cell Series Solar Panel Power Range 515W 520W 525W 530W 535W.

Jesfer floating solar achoring system adopt new module design, which can realize double row arrangement on the same facing or symmetrical facing, improve solar power generation efficiency and installed capacity, facilitate installation and save cost. This floating platform system has a service life of more than 25 years.

The solution of solar mounting systems for metal roof is designed for standing seam tin roof solar panel mount. With various standing seam clamps, this solution can be applied to different rooftops.

12.8V 10Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Battery 12V Lithium Iron Phosphate battery is ideal for sealed lead battery replacement.

High efficiency 240w Monocrystalline Solar Panel for Residential Commercial Application

The solar adapter plate is made of A2 stainless steel which ensures a long life and high strength. It's used for a connection between the hanger bolt and profile rails.