The solar grounding copper jumper is used for grounding between rail splice of PV mounting structures.
LARGE Thin Film Solar Panel Clamps are used for framess solar panel, The thickness range of PV module is from 4mm to 10.5mm
GD100-PV series solar vfd drives are that INVT newly launches specially for solar pumping applications. Based on the original solar pump inverter products, which optimizes the usability and performance, and extends applicable voltage levels and power range of the product. The voltage level can be applied to single phase/three phase 220V, three phase 380V pumps, power range from 0.4kW to 110kW.
Floating Solar Mounting System is designed for solar panel installation on water areas like ponds,lakes,reservoirs etc.
12.8V 7.5Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Battery 12V Lithium Iron Phosphate battery is ideal for sealed lead battery replacement.
The solar carport structure design has been widely used in solar system installation.
The 90-degree photovoltaic cable clamp provides a solution for photovoltaic system cable wiring that needs to run perpendicular to the module frame.
No roof penetration - 100% waterproof Pre-assembling-easy and instant installation 6063 T5 aluminum -clamp is light-weight and attractive Q235B steel - clamp has high wind resistance
Solar carports are becoming more and more popular for charging electric vehicles in public and private parking lots, preventing ultraviolet rays and precipitation, and providing convenient charging stations for electric vehicles. Soeasy solar carport uses AL6005-T5, which has strong corrosion resistance and stability.
Solar pump inverter obtains direct current energy from photovoltaic cells, and converts it into electric energy to drive the water pump. According to the intensity of sunlight, take use of MPPT algorithm, the inverter adjusts the output frequency to make maximum use of solar energy.
The FGET gel battery shows some distinctive advantages, such as super thermal stability, high deep discharge capability, good recovery from deep discharge , even if the battery is left discharged for three days, it will recover to 100% of capacity.
500W portable power station,If you want the datasheet of the portable power station, leave message here please!
All in one pathway senor solar LED street lamp with detachable lithium battery, patent bluetooth APP, can turn on/off the light, read the data, troubleshooting and so on.
The G4S floating solar mounting system is designed for water photovoltaic power plants, water structure photovoltaic power generation ,applied for ponds, lakes, reservoirs,etc. It can greatly save land resources and will not have too much impact on the aquatic environment. It would have the high power generation efficiency because the wide water surface can effectively prevent the shadow from restricting the power generated by the photovoltaic module, and at the same time, the illumination area would always be even and much longer.
GD100-PV series solar vfd drives are that INVT newly launches specially for solar pumping applications. Based on the original solar pump inverter products, which optimizes the usability and performance, and extends applicable voltage levels and power range of the product. The voltage level can be applied to single phase/three phase 220V, three phase 380V pumps, power range from 0.4kW to 110kW.
Solar ABS Solar Long Side Bracket is made of 100% ABS plastic, to make sure excellent UV resistant. This product can deal with the problem of penetrating and leaking, as its installtion witout drilling holes just using glue to be fixed on roof.
With its flexible and professional design,2 to 6 solar modules can be installed on a pole solar system .the 8pcs & 16pcs modules solar pole mounting structure is the most popular for recent years ,which the tilt angle of solar modules can be adjustable from 0 to 60 degrees.
Jesfer's Ground Screws provides utmost stability,efficiency and sustainability to many applications,such as photovoltaic solar farm construction.