Card access system tripod turnstile is a waist-height three arm roller gate. When a person swipes IC or ID card on card reader and rotates the triple arms, he or she can go through the gate. The half-height turnstile gate is the most ordinary turnstile gate and it is installed popularly in different locations.
Access control reader tripod turnstiles are widely used and installed in bus station, tourist spots, gym and stadium. Tripod turnstile is durable, waterproof and rainproof, and it can be installed outdoors. It allows only one person to pass each time. Tripod turnstile controls the crowds and strictly checks tickets. It is very suitable for using at the outer entrance of stadium.
Why should we choose tripod turnstile for stadium?
1. Tripod turnstile is anti-trailing. After a person passes through the gate, the gate is locked and prevents from following. The person behind must swipe card for verification again to be allowed to pass. The entry into stadium is of each ticket for each person. Card access system tripod turnstile effectively prohibits the entry of the persons without tickets.
2. RFID reader tripod turnstile is rugged and durable. People who have no tickets or cards can not force to pass the gate.
3. It is easy to operate and maintain tripod turnstile. It is also relatively easy to install.
4. Tripod turnstiles could be equipped with different access control systems, for example, proximity card, and biometric reader, etc.
5. The prices of tripod turnstiles are relatively lower, and less will be invested for this turnstile gate.
6. Stocks are usually available. The lead time of tripod turnstile is shortened and they could be delivered quickly.
Main Parameters:
Moduel No. |
LD-T301 |
Size |
420х280х1020mm |
Material |
304 stainless steel |
Unlocking time |
0.2s |
Traffic speed |
≤35 persons/min |
Channel width |
≤550mm |
Input voltage |
220V, 50HZ |
Drive voltage |
24V |
Ambient temperature |
: -25~+70 |
Power |
30W |
Opening signal input |
dry contact |
The material thickness |
1.2mm |
Main Characteristics:
1. The housing of tripod turnstile is made of SUS 304 stainless steel sheet of punch forming. Nice shape is elegant and rust proof. It is durable and resistant to outside force.
2. The design is reasonable and it works with low noise. Its operation is stable and it has a long service life.
3. Standard switch signal input. The turnstile gate could be controlled by external switch, bar code, IC/ID card, fingerprint or facial recognition terminal.
4. Various work modes are for options. Unidirectional or bidirectional flow limit are both available. A combination of multiple access modes can be set flexibly.
5. It is anti-recoil. When people want to go through the tripod turnstile gate from the opposite direction, the gate is locked.
6. It is anti-trailing and it prevents from people’s following.
7. In an emergency, arms are dropped in order to evacuate people.
8. It has a unified and standard external electrical interface connected with different reading and writing devices. Remote control and management can be realized by computer.
9. Management personnel can set and limit passing time. After swiping cards, if a person does not pass through the turnstile gate within the limited time, access permission will be canceled.
10. Tripod turnstile can be used cooperatively with other turnstile gates, such as flap barrier turnstile, swing barrier turnstile, etc.