0.2ml 96 well Laboratory Ice Box can hold 96 centrifuge tubes with capacity of 0.2 ml, made of polypropylene material, low temperature and corrosion resistance, can be used continuously for about 4 hours.

Plastic Test Tube Laboratory Centrifuge Tube Box can hold 96 centrifuge tubes with a capacity of 0.2 ml and can be sterilized at high temperature and high pressure below 121℃. Polypropylene material.

Laboratory Centrifuge Tube Multifunctional Ladder Test Tube Rack is made of polypropylene material, which can hold 82 centrifuge tubes with 0.2 ml、0.5ml、1.5ml、2ml、5ml、10ml、15ml、50ml capacity.

96 well Laboratory Test Tube Centrifuge Tube Holder made of polypropylene material has the characteristics of durability, easy cleaning and so on. Designed to hold 0.5 ml and 1.5 ml centrifuge tubes.

24 well Laboratory Test Tube Centrifuge Tube Holder is made of polypropylene material and can hold 25 centrifuge tubes with a capacity of 0.5 ml or 1.5 ml, double panel design.

50 well Medical Test Tube Centrifuge Tube Holder made of ABS material, adding silicone pad inside to make the centrifuge tube stable and safe. Can hold 50 centrifuge tubes with diameters from 10 mm to 18 mm.

Laboratory Medical 2 ml Sterile Cryotube is made of polypropylene material, with a leakproof silica gel ring and a large area of writing area to increase the safety of the experiment. The freezing tube can be sterilized.

Lab 6 Holder Plastic Pipette Rack is made of plastic and has the characteristics of durability and easy cleaning. The rack can hold six pipette at the same time. They can be single channel or multi channel.

Laboratory Hospital Test Tube Centrifuge Tube Holder is specially designed to store 0.5 ml or 1.5 ml of centrifuge tubes. Made of polypropylene material, the specification is 12 times 5 holes.

Plastic sample vials storage rack made of polypropylene and can be placed 50pcs of 2 ml injection bottles. The panel is marked with convex and concave, and it has the characteristics of corrosion resistance and easy cleaning.

Cardboard Cryotube Storage Freeze Box, designed for long-term storage of cryotube and cryotube vials, the upper part of the vent, easy to air circulation, the box has a waterproof coating outside, extended service life.

The Cryotube Storage Freezing Box is made of PP material and is used to store 2 ml of freezer tubes, the plastic freezing box size is 126*126*51mm.

20 slides IHC microscope glass slide staining tray can accommodate 20 slides at the same time; its speical design can give you better experience; it can also save your operating time.

Lab instruments microscope slide storage cabinet for better storage pathology spciments . Microscope Slide storage can storage 5600 slides

Laboratory Tissue Microtome blade holder can be disposable microtome blade . It can be cut samples for Microtome

Laboratory Tissue Microtome blade holder can be disposable microtome blade . It can be cut samples

Microscope slide tray for 20 slide with Tilt angle 30 degrees . Easy to put and take slides

Polyester Urethane Tissue Cassettes Biopsy Foam Pads is a fully reticular cellular polyurethane foam with soft and flexible foam and small pores. The tolerable temperature is between -40℃ and 121℃. There are blue and black.

Histology Pathology Plastic Tissue "O" Embedding Rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. Embedded ring is made of polypropylene material.

The Medical Disposable Tissue Embedding Cassette for handling small biopsy specimens without the need biopsy pads, it is made of POM material ,100% resistant to chemical solvent, front tilt angle is 45.