L feet solar metal roof mounting 50*80mm L foot solar accessory

Quick mount pv solar panel and Kseng have the complete pitched roof mounting system, L-foot and rail combine seamlessly to provide a complete, our mounting solution backed by a 25 years product service life and 10 years warranty.

Our L-feet mounting system merits are the low price, easy installation and lightweight. 

Our L-foot solar panel mounting system have the another name: the Fast-Rack Rail System that is designed to speed the installation of solar PV arrays on (pitched) sloped roofs with a minimum number of roof penetrations.

1.Drill a hole in the right position as planned, install the EPDM rubber and L-bracket, then screw the bolt into the wooden beam below.

2.Section of L-bracket after installation. Please be careful during installation, not destroy the steel below.

3.Mount the clamp and L-shaped bracket to the roof rail.  confirm and tighten the bolts. Both rails must be on the same level.

4.The module is secured to the roof rail by end clamps. As shown on the right. First, the panel is placed flat on the rail, then the rail clip is snapped into the rail slot and finally the end clamp kit is installed.

5.Portrait solar panel, Solar panel Length(should check the solar panel install instruction). Landscape solar panel, solar panel width.

6.L-bracket horizontal spacing can be up to 2m. L- bracket upward spacing is about 1/2 or 3/4 the length of solar panel. Spacing between solar panel:18mm.