inch Insert ball bearing UC 202-9 with 9/16 bore size

Sales

The insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone

Product Detail

In fact, the insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone.

Although its basic performance is similar to that of deep groove ball bearing, most of the bearings are used in relatively rough machinery, the installation and positioning are not accurate enough, the axis of the shaft and the seat hole is neutral, or the shaft is long and the deflection is large, and the accuracy of the bearing itself is not high enough, and some structures are relatively rough, so the actual performance of the bearing is relatively the same specification Deep groove ball bearings are subject to considerable discount. For example, the insert ball bearing with jackscrew is applied to the through shaft with large rigidity difference and deflection. Both sides of the bearing are provided with sealing rings, which can prevent the invasion of dirt and have been filled before leaving the factory.

Bearing NO.	Dimensions(mm/in.)									Dynamic load ratings(N)	Static load ratings(N)	Weight (kg)
	d	D	B	C	S	S1	G	Ds	F
UC 201-8	1/2	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.12
UCS202	15	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.11
UC 202-9	9/16	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.11
UC 202-10	5/8	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.11
UCS203	17	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.1
UC 203-11	11/16	1.5748	1.0787	0.5512	0.4528	0.626	0.157	10-32UNF	0.146	9600	4600	0.1
UC201	12	47	31	17	12.7	18.3	4.8	M6x1	3.7	12800	6600	0.2
UC 201-8	1/2	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.19
UC202	15	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.19
UC 202-9	9/16	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.19
UC 202-10	5/8	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.19
UC203	17	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.18
UC 203-11	11/16	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.17
UC204	20	47	31	17	12.7	18.3	4.8	M6x1	3.7	12800	6600	0.16
UC 204-12	3/4	1.8504	1.2205	0.6693	0.5	0.72	0.189	1/4-28UNF	0.146	12800	6600	0.16
UC205	25	52	34.1	17	14.3	19.8	5	M6x1	3.9	14000	7850	0.19
UC 205-13	13/16	2.0472	1.3425	0.6693	0.563	0.78	0.197	1/4-28UNF	0.154	14000	7850	0.23
UC 205-14	7/8	2.0472	1.3425	0.6693	0.563	0.78	0.197	1/4-28UNF	0.154	14000	7850	0.22
UC 205-15	15/16	2.0472	1.3425	0.6693	0.563	0.78	0.197	1/4-28UNF	0.154	14000	7850	0.2