[High efficiency] --Design pressure 0.5Mpa:1.Hydrogen production in 5 minutes at a time, concentration up >2200ppb 2.Hydrogen production in 10 minutes at a time, concentration up >3300ppb [Cavity Splitting technology complete hydrogen and oxygen separation]--1.Platinum titanium electrode ion vacuum plating 2.Platinum proton exchange membrane 3.Multi-layer pressure protection 4.Using BEKAERT Titaniunm fiber felt sheet [Safe and reliable]Food-grade TRITAN material, ultra-micro electrolysis, without dissolution and corrosion

BangWin's PSA Nitrogen Generator equipment has low energy consumption and low operation cost.It is convenient to adjust the nitrogen purity. The nitrogen purity is only affected by the nitrogen exhaust volume. Thepurity of ordinary nitrogen making machine can be adjusted arbitrarily between 95% - 99.99%. The purity of high-purity nitrogen making machine can be adjusted arbitrarily between 99% - 99.999%. The equipment has high automation, fast gas production and can be unattended, lust press the button to start and shut down,and nitrogen can be produced within 10-15 minutes The equipment has the advantages of simple process flow, compact structure, small floor area and strong adaptability

The versatility of small air separation equipment allows for the production of high-purity gases, such as oxygen or nitrogen, which find applications in industries including medical, welding, food packaging, electronics, and chemical manufacturing.

The functioning of a small liquid nitrogen machine relies on the liquefaction process of nitrogen gas. The machine compresses the gas to a high pressure and cools it down with a heat exchanger, causing it to condense into liquid form that can be stored and utilized for various purposes.

Our company produced many kinds of oil free compressor, inlcuding oil free air compressor, oil free gas compressor, including oxygen gas, nitrogen gas, hydrogen gas, natural gas, Argon gas, helium gas, Sf6 gas ects more than thirty kinds of gas medium,max pressure up to 40Mpa.

CHR series applies complementary powersupply from wind energy, solar energy andelectricityatnighttoproducehydrogen.Then,using metal hydrogen storage technology orcompressedhydrogenstoragetechnologytostore this hydrogen. If lack of electricity, usercan use hydrogen fuel cell to converthydrogen to electricity by configuring DCIACconverter. If hydrogen fuel filling stationneeded,user can configure hydrogenboostingsystemtofillhydrogenintohydrogenfuel cell car, drone, bus, truck, electricvehicleandforklift.

BangWin's PSA Oxygen Generator equipment compact layout, module design, convenient transportation, save the site. It covers a small area. Easy to install, customers only need to connect the power supply and three pipes. And our equipment appearance beautiful atmosphere. The device is properly configured. Strict process control. Free wearing parts at random. Every device is turned on and tested before delivery. BangWin's PSA Oxygen generator oxygen purity can be reached 93±3%.Molecular sieve service life is more than 10 years, PLC control cabinet for Siemens PLC, built-in imported gas distribution system, ESG stainless steel pneumatic valve, automatic follow-up pressing device, touch screen display control: oxygen concentration, flow, pressure real-time display, concentration historical data storage display. BangWin's PSA Oxygen Generator equipment adopts oil-free design, does not contact with the compression medium, avoid the pollution of the gas in the compression process, to ensure the purity of the gas body, microcomputer controller control, high level of automation.

Our company produced many kinds of oil free compressor, inlcuding oil free air compressor, oil free gas compressor, including oxygen gas, nitrogen gas, hydrogen gas, natural gas, Argon gas, helium gas, Sf6 gas ects more than thirty kinds of gas medium,max pressure up to 40Mpa.

BangWin's PSA Oxygen Generator equipment compact layout, module design, convenient transportation, save the site. It covers a small area. Easy to install, customers only need to connect the power supply and three pipes. And our equipment appearance beautiful atmosphere. The device is properly configured. Strict process control. Free wearing parts at random. Every device is turned on and tested before delivery. BangWin's PSA Oxygen generator oxygen purity can be reached 93±3%.Molecular sieve service life is more than 10 years, PLC control cabinet for Siemens PLC, built-in imported gas distribution system, ESG stainless steel pneumatic valve, automatic follow-up pressing device, touch screen display control: oxygen concentration, flow, pressure real-time display, concentration historical data storage display. BangWin's PSA Oxygen Generator equipment adopts oil-free design, does not contact with the compression medium, avoid the pollution of the gas in the compression process, to ensure the purity of the gas body, microcomputer controller control, high level of automation.

Our company produced many kinds of oil free compressor, inlcuding oil free air compressor, oil free gas compressor, including oxygen gas, nitrogen gas, hydrogen gas, natural gas, Argon gas, helium gas, Sf6 gas ects more than thirty kinds of gas medium,max pressure up to 40Mpa.

Our company produced many kinds of oil free compressor, inlcuding oil free air compressor, oil free gas compressor, including oxygen gas, nitrogen gas, hydrogen gas, natural gas, Argon gas, helium gas, Sf6 gas ects more than thirty kinds of gas medium,max pressure up to 40Mpa.

The air enters the air compressor after removing dust and mechanical impurities through the air filter, compressing to the required pressure, and outputting clean compressed air after strict purification treatment of oil, water and dust removal, with the purpose of ensuring the service life of the molecular sieve in the adsorption tower. There are two adsorption towers with carbon molecular sieves, one tower works while the other tower is decompressed and desorbed. The clean air enters the working adsorption tower, passing through the molecular sieve when oxygen, carbon dioxide and water are adsorbed by it, the gas flowing to the exit end is nitrogen and trace amounts of argon and oxygen. Another tower (desorption tower) so that the adsorbed oxygen, carbon dioxide and water from the molecular sieve pores out of the discharge to the atmosphere. In this way, the two towers take turns to complete the separation of nitrogen and oxygen, continuous output of nitrogen, variable pressure (_bian4 ya1) adsorption nitrogen purity of 95%-99.9%, if you need a higher purity of nitrogen need to increase the nitrogen purification equipment. Variable pressure adsorption nitrogen machine output of 95%-99.9% nitrogen into the nitrogen purification equipment, while adding the appropriate amount of hydrogen through a flow meter, in the purification equipment in the oxygen removal tower hydrogen and nitrogen in the trace oxygen catalytic reaction to remove oxygen and then cooled by the water condenser, vapor separator to remove water, and then through the dryer depth drying removal.

Air separation equipment includes: centrifugal air compressor, air pre-cooling system, purification system; booster turbo expander, fractionation system, oxygen compression system; nitrogen compression system, liquid storage system, instrument control system and electronic control system

The maintenance cost of small air separation equipment is lower, which can reduce operating costs. Small air separation equipment can be combined and expanded to achieve scale production. Small air separation equipment will produce a certain amount of waste gas and wastewater in the operation process, but the amount is small, and the impact on the environment is relatively small.

kdon (Ar)-11000-20000-300 Advanced technologies such as adsorption, condensation, and membrane separation are utilized in air separation equipment to separate and purify air components. By adjusting temperature, pressure, and molecular sieves, the equipment achieves efficient separation and purification.

The liquid nitrogen generator (liquid nitrogen machine) is composed of three parts: nitrogen generator (built-in or external), refrigeration equipment (gas liquefaction equipment) and Dewar tank. The whole machine has the function of automatic liquid replenishment with one key, and the equipment starts automatically when the liquid nitrogen in the liquid nitrogen tank is lower than the set liquid level. Liquid nitrogen machine manufacturing adopts the principle of mixed mass throttling refrigeration, cooling nitrogen from the ambient temperature to the saturation condensing temperature of nitrogen liquefaction step by step, the lowest temperature of refrigeration machine refrigeration can be up to -196 °, the liquid nitrogen liquefied in the refrigeration evaporator is transported to the liquid nitrogen tank to save the liquid nitrogen to obtain liquid nitrogen, the equipment automatically detects the liquid nitrogen level in the Dewar tank, and fully automatic control of the operation of the equipment.

Small air separation equipment refers to compact systems that efficiently separate components of gas, such as oxygen and nitrogen, offering a range of advantages for various applications.

BangWin's PSA Oxygen Generator equipment compact layout, module design, convenient transportation, save the site. It covers a small area. Easy to install, customers only need to connect the power supply and three pipes. And our equipment appearance beautiful atmosphere. The device is properly configured. Strict process control. Free wearing parts at random. Every device is turned on and tested before delivery. BangWin's PSA Oxygen generator oxygen purity can be reached 93±3%.Molecular sieve service life is more than 10 years, PLC control cabinet for Siemens PLC, built-in imported gas distribution system, ESG stainless steel pneumatic valve, automatic follow-up pressing device, touch screen display control: oxygen concentration, flow, pressure real-time display, concentration historical data storage display. BangWin's PSA Oxygen Generator equipment adopts oil-free design, does not contact with the compression medium, avoid the pollution of the gas in the compression process, to ensure the purity of the gas body, microcomputer controller control, high level of automation.

BangWin's PSA Nitrogen Generator equipment has low energy consumption and low operation cost.It is convenient to adjust the nitrogen purity. The nitrogen purity is only affected by the nitrogen exhaust volume. Thepurity of ordinary nitrogen making machine can be adjusted arbitrarily between 95% - 99.99%. The purity of high-purity nitrogen making machine can be adjusted arbitrarily between 99% - 99.999%. The equipment has high automation, fast gas production and can be unattended, lust press the button to start and shut down,and nitrogen can be produced within 10-15 minutes The equipment has the advantages of simple process flow, compact structure, small floor area and strong adaptability

Small air separation equipment is smaller in volume, occupies less space, convenient for placement and installation. Small air separation equipment light weight, easy to transport and handling.