Level Brace, also called Plain Brace, is main component of system scaffolding which use as diagonal ledger. It is used in the large bay mobile scaffolding tower and gives additional strength to the tower structure and keep the tower stable.

Shoring Prop is a kind of adjustable vertical pipe suport for concrete formwork suporting, is widely used for building, tunnel, mine construction. The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustments. The casting collar located below the pin gives fine adjustment for leveling or striking. The rolled thread ensures no loss of material or strength at this critical point.

Simple and stylish, this burner works with any decor. For use with our home fragrance oils and wax melts. *Wax Melt sold separately

This wax burner is perfect for all your home fragrance favourites

Stringer Stair is a popular stairway for system scaffolding in American market. It is set for 7' scaffold bay length, 6'7" high rising and for 3'6" wide access. The stair stringers and treads can be seperated. It can help to reduce job difficulty of when installing or dismantling the stair. Also it is much more convenient for material storage and transportation.

Pluggable Ceramic 3D Decoration Wax Warmer Inspired the Fragrance to Your Life!

ceramic incense sticker holder

Aluminum Mobile scaffolding tower is widely used in exhibition setups, indoor decoration or outside construction. It can be movable with caster wheels.We also can customize it according to your drawings. Components of a complete set scaffolding tower: Rung Frame, Rung Ladder Frame,Horizontal Brace, Diagonal Brace, Plain Brace, Stabilizer, Joint Pin/Spigot, Handrail, Platform/Trapdoor Platform, Toe Board, Caster Wheel.

Acrow Prop is a kind of single post heavy duty steel props for construction. It is simple and innovative design, fabricated with high yield steel tube to varies specifications, permits versatility across a multitude of uses, including falsework support, as raking shores, and as temporary support.

Side brackets allow for the extension of the scaffold platform beyond the legs, usually by a multiple of plank widths. When used with frame scaffolds, the side bracket is placed at the leg and is parallel to the frame or bearer. Angle Iron Side Bracket is the kind of bracket made by angle iron, with bell hanger.

Environmental protection new material, family must choose wallboard.Fluted Panel Pvc with Good wear-resistant quality, green environmental protection, protect health

Ring Lock Scaffolding Side bracket is used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.

All aluminum Plank is made by 6061-T6 or 6082-T6 aluminum extrusion, plank width 19" (483mm), plank length from 3' to 10'. The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

Kwikstage Scaffolding Tie Bars have pins at each ends which fit in holes of 2 and 3 Hop Up Brackets to prevent the brackets spreading and the planks from becoming dislodged.

Multi-functional Scaffolding, also called Baker Scaffold, is a kind of light weight mobile scaffold for home uses, in-house plastering, decoration, electrician working. The scaffold can be flexibly adjusted in different working height, and can be moved and stored easily. It is usually to be powder coated in yellow colour.

Kwikstage Stairway (Steel) is the safe & easy solution for vertical access in lightweight with non-slip treads and platform. It is fabricated and designed to fit in a 1.27x2.44m scaffolding bay with 1.5m lift height. It is a specially design to fit in 1.2m tranom for two stairs side by side installation. The stairs are hot dip galvanized.

ceramic incense sticker holder.

Cross Lock Scaffolding is a kind of new modular scaffolding system which in simple structure and fabricated with few accessories, it can provide easy erection and dismantling, and speeded and high efficiency performance, and it is use for residential, commercial construction. Scaffolding Components: Standard (Vertical), Ledger (Horizontal).

Aluminum Plywood Ladder Hatch Deck is made by 6061-T6 or 6082-T6 aluminum extrusion and fire-proof plywood panel, plank width 24" or 28", plank length from 7' to 10'. Hatch Ladder: Aluminum 6061-T6, 7-step ladder The plank complies with OHSA & ANSI A10.8 requirements. Safety load is 75lb/ft2.

Amercian Type Steel Plank is the right platform for the scaffolding on which people can stand and work. The main features of the planks are optimum strength, stability, durability and traction. The top surface usually has holes which provide traction as well as serve purpose for the water removal as it shall not clog on it. We manufacture various types of platform for different markets. The planks are fabricated by 1.8mm or 2mm thickness of steel plate, and comply with the requirements of OHSA & ANSI A10.8.