GE Fanuc | IS220PRTDH1B | Module New In Stock

Description

General purpose I/O is used for both turbine applications and process control. Turbine-specific I/O is used for direct interface to the unique sensors and actuators on turbines. This reduces or eliminates a substantial amount of interposing instrumentation. As a result, many potential single point failures are eliminated in the most critical area for improved running reliability and reduced long-term maintenance. Direct interface to the sensors and actuators also enables the diagnostics to directly interrogate the devices on the equipment for maximum effectiveness. This data is used to analyze device and system performance. Also, fewer spare parts are needed.  S-type boards have one I/O pack for simplex and dual redundant systems. They are half the size of T-type boards and are DIN-rail or surface mounted. Two versions of the boards are available, H1 and H3. H1 boards have fixed terminal blocks, and H3 boards have removable terminal blocks. A H2 version is available for mounting of custom blocks such as spring-cage or insulation displacement. S-type boards have box type terminal blocks that accept one 3.0 mm2 (#12AWG) wire or two 2.0 mm2 (#14AWG) wires with 300 V insulation per point. Screw spacing is 5.08 mm (0.2 inch) minimum, center-to-center. A shield strip is provided to the left of each block. It can be connected to a metal base for immediate grounding or floated to allow individual ground wires from each board to be wired to a centralized, cabinet ground strip. 

About Us

Runto Electronic Automation Limited is located in Xiamen Fujian China which is one of the beautiful coastal tourism city in China Southeast region.

We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famous PLC DCS product maintenance service providers in the world.

Strong PLC Parts Series

ABB PLC

ABB DCS 800xA System/S800 I/O System, ABB DCS 800xA System/S900 I/O Series, ABB Advant OCS/800XA , ABB H&B Freelance 2000 , ABB BAILEY-INFI90/Bailey Net 90, ABB DSQC Robot Parts, ABB PLC cards and boards

Honeywell DCS

Honeywell Experion PKS ( C200 ,  C300 ), Honeywell FSC

Bently Nevada TSI

Bently Nevada  3500 Series Monitor system, Bently Nevada  3300 Series Monitor system

Modules/Chassis/I/O Module,  Power Supply Module/Proximitor Sensor/ Programming Cable

GE/General Electric PLC

GE IC695, IC698, GE IC694, IC697, GE IC754,  IC752 QuickPanel, GE IC660,  IC600   Seriex Six, GE IC610, IC620  Series One, GE IC692   Series 90-20, GE IS200, IS215, GE DS200, DS3000/3800

Invensys Foxboro DCS

Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate

InvensysTriconex DCS

Triconex Rack, Triconex Power Module, Processor Module,  Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable

Yokogawa PLC

Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards

Schneider PLC

Modicon, Quantum 140 System

Hima PLC

CPU/Power Distribution Module/COPROCESSOR MODULE/INPUT MODULE/OUTPUT MODULE

Emerson

DeltaV / EMERSON/KJ Series 2  I/O module, Terminal Block , POSITIONING SERVO DRIVE,

Epro/CSI 6500 machinery health monitor /MMS6000 Measurement Modules/MMS 3000 System

Siemens PLC

MOORE,  6DD,  6DP,  S7,  S5 System Series

Our Services   

-In stock  

- MOQ 1 Pcs

-100% new factory sealed

- Warranty: 12 months

- All the goods will be tested before shipment 

- Payment: T/T

-Shipped within 1-2 days after payment

-Shipment: DHL UPS FedEx, etc (Packed in brand new and original box)

More Products