We are the first and only factory to have a whole Baking Finishing Line to treat the spare parts.
Product Specification
| Bottom width(W) | 100-300mm | |||||
| Height(H) | 30-80mm | |||||
| Small side(E) | 10-20mm | |||||
| Material width(λ) | 178-485mm | |||||
| Material thickness(&) | Q235（1.5-3.0mm）/G350(1.5-2.5mm) | |||||
| Chain size | 1.2 inch +1.5 inch +1.75 inch | |||||
| Main shafts diameter | φ80/65mm, round steel with modulating treatment | |||||
| Leveling shafts diameter | Solid rollers φ95mm（upper2,down3） | |||||
| Wall panel thickness | 25mm | |||||
| Machine base size | H396*199 | |||||
| Driving power | Motor 18.5KW, Helical gear reducer with K series | |||||
| Punching and cutting power | Hydraulic power7.5KW | |||||
| Forming speed | 22m/min without punching | |||||
| No. of punching | 2 sets（Double+single）14*25 | |||||
| Interchanging way | Unlimited change by computer 0.25/0.55KW | |||||
| Punching and cutting way | Pre punching and cutting + post cutting | |||||
| Roller material | Most roller materials are Gcr15,/Leaning roller materials are Cr12 | |||||
| Forming station | 4+5+5=14 stations (without embossing） | |||||
| Blade material | Cr12Mov, Heat treatment after wire cutting | |||||
| Control mode | PLC（Delta Taiwan） | |||||
Main Parts
1. Feeding material guide and leveling device
Two rollers (one up and one down roller) for material guide and 5 rollers ( 2 up and 3 down rollers ) for straightening.
solid and shafts diameter=φ95mm
2. Pre-punching system
Two set of punching device of three cylinders (one cylinder for single hole and 2 cylinders for dual-holes.)
Also, can make three or more punching sets as customer’s requires.
3. C purlin machine rollers and shafts
Rollers are made of bearing steel GCr15, precision machined, hard Chrome Coated;
Leaning rollers are made by Cr12;
Shafts manufactured from #45 steel or Gcr15 for optional, Main Shaft Diameter=φ80/65mm, quenching and tempering treated
4. C purlin machine post-cutting system:
No need to change cutter for different size;
Unlimited specification changing for height and bottom width;
Cutting blades made by high quality mold steel Cr12 with heat treatment
Cutter frame made from high quality 30mm steel plate by welding
5.Control System
C purlin machine control box
(Touch screen brand: WEINVIEW, Inverter brand: Finland VOCAN/Taiwan DELTA/ALPHA, Encoder brand: Japan Koyo/OMRON)
6.Uncoiler
C purlin machine uncoiler
One set manual uncoiler, Un-powered, manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton
We also have hydra uncoiler for option
7. C purlin exit rack
Un-powered, three units
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
