EX55A Carrier Roller Top Roller Upper Roller Undercarriage Part For Excavator

Sales EX55A Carrier Roller Top Roller Upper Roller Undercarriage Part For Excavator

EX55A Carrier Roller Top Roller Upper Roller Undercarriage Part For Excavator

  The function of the roller is to transfer the weight of the locomotive group to the ground and roll it on the track. To prevent derailment, the roller should also be able to prevent the track from moving laterally relative to it. Rollers often work in mud and sand, and withstand strong impacts, the working conditions are extremely harsh, and the rim is easy to wear. The requirements for the roller are: the rim is wear-resistant, the bearing seal is reliable, and the rolling resistance is small.

 

  Our products are according to the standard of OEM to manufacture.

Product Detail  

EX55A Carrier Roller Top Roller Upper Roller Undercarriage Part For Excavator

  Drag sprocket function: the carrier roller is used to reduce the track sag between the idler and the drive sprocket, and support the track loose edge from the drive sprocket, and when the track in the engagement is tightened, it is used to guide the track to disengage from the mesh, when installing a drag sprocket, it should not be placed in the middle of the wheel base, but closer to the drive sprocket. It is worth noting that if the diameter of the e-mail sprocket is too small, there is a possibility that the track will slip along the e-tramp rim, which will grind out a "light plane" according to the wear of the e-mail rim, which will cause the e-chainer to stop rotating.

 

  Drag sprocket installation arrangement: when the drag sprocket is installed on the excavator, a single arm support is adopted, and the support block is heightened, so that the space below is increased, and the obstruction of silt and stones is avoided when walking, and the wear between the track section and the reducer bearing is also avoided, and the passability of walking is improved.

Komatsu excavator track roller part number list:

 

Komatsu Bulldozers
Application Usco Part No Pos Alternative Nos. Berco Ref ITM Ref Notes
D40, D50 140-30-00053 SF 131-30-000343 KM859 A4060000M00  
140-30-00063 DF 131-30-000353 KM860 B4060000M00  
141-30-00073 CR   KM103 C4060100M00  
D65 141-30-00575 SF 141-30-00576,-00578 KM868 A4065000M00  
141-30-00585 DF 141-30-00586,-00588 KM869 B4065000M00  
141-30-00563 CR 141-30-00565,-00568 KM118 C40651A0M00  
D65E-12聽 14X-30-00081 SF 14X-30-00082,-14100 KM2101 A40650E0M00  
D65EX-12 14X-30-00091 DF 14X-30-00092,-14200 KM2102 B40650E0M00  
  14X-30-00142 CR 14X-30-00140,-00141 KM2105 C40651E0M00  
D85 155-30-00126 SF 155-30-00250, -00127 KM351 A40850A0M00  
155-30-00116 DF 155-30-00240,-00117 KM353 B40850A0M00  
155-30-00233 CR 155-30-00232,-00234 KM120 C40851A0M00  
D155-1 D155-2 175-30-00760 SF 175-30-00484,-00489 KM122 A4015000M00  
175-30-00770 DF 175-30-00494,-00499 KM123 B4015000M00  
175-30-00515 CR 175-30-00517,-00471 KM124 C40151G0M00 D155AX-3
D155-3聽 17A-30-00070 SF   KM2265 A40159D0M00  
D155AX-3 17A-30-00080 DF   KM2266 B40159D0M00  
D355 195-30-00335 SF 195-30-00336 KM926 A4035000M00  
195-30-00345 DF 195-30-00346 KM927 B4035000M00  
195-30-00105 CR 195-30-00106 KM578 C4035100M00  
D275 17M-30-00220 SF        
17M-30-00230 DF        
195-30-00580 CR   KM2160   PC650-5
D375A-1 195-30-00562 SF 195-30-00561 KM1039    
195-30-00572 DF 195-30-00571 KM1040    
195-30-00580 CR        
D375A-2/3 195-30-01051 SF 195-30-01011,-01010 KM1272 A4037000M00  
195-30-01061 DF 195-30-01021,-01020 KM1279 B4037000M00  
195-30-01041 CR 195-30-01040 KM1281 C4037100M00  
Komatsu Excavators
PC60-5/ 6 201-30-00290 SF 201-30-00291 KM1690    
PC75, PC95 (B1) VA380 SF   VA380 A14010B1M00  
B14010B1M00 DF     B14010B1M00  
PC100-120 FAI 203-30-00222 SF 20E-30-K1580 KM1705 A40120A0M00  
PC120-5 203-30-00230 CR 203-30-00150 KM2794 C4012000M00  
PC200-2/3/5/6 PC220-2/3/5/6 PC210-6 205-30-K1200 CR 20Y-30-00021,-00022 KM1640 C40201A0M00  
205-30-00171 SF 205-30-00172,-76101 KM1179 A40200F0M00 PC200-2 & PC220-2
20Y-30-00130
20Y-30-00011 SF 20Y-30-00112, KM1428 A40200E0M00 PC200-3/5/6 PC220-3/5/6 PC210-6
20Y-30-00014
PC300-3/5 207-30-15102 CR 208-30-00320 KM1817 C40301B0M00 & PC400-5
207-30-K1800,-16102
207-30-00140
207-30-00150 SF   KM1429 A40300B0M00  
PC400-3/5 208-30-00210 SF   KM1743 A4040000M00  
PC650-5 209-30-00191 SF 209-30-00121 KM2143 -  
PC1000 21N-30-00023 SF   KM2503    
21N-30-00030 CR        

 

Company Profile

  Changte Machinery Parts Co., Ltd  is a collection of industry, trade as one of the modern parts company, specializing in the production and sales of excavator and bulldozers parts, the main products: chassis parts, vulnerable parts, seals, electrical parts, engine parts, hydraulic parts (system), wear-resistant parts, filter parts, etc.

Our products can be used with various machines such as KOMATSU, CATERPILLAR, HITACHI, SUMITOMO, DOOSAN, HYUNDAI, VOLVO, KATO, JCB, KOBELCO, SANY, XCMG, LiuGong, LIEBHERR, ZOOMLION, SUNWARD, CSAE, WORLD and so on. We can also design special products as our customer requests. We offer high quality products, shorter delivery times and the best logistics.

 

FAQ

Q1:How do we ensure quality? 

A1:Before mass production, it is always a pre production sample; Always conduct a final inspection before shipment;

Q2:What can you buy from us?

A2:All accessories of excavator

Q3:Why do you want to purchase from us instead of from other suppliers? 

 

A3:We have our own factory to ensure timely delivery; We have a complete quality control system to ensure good quality; We have a professional sales and service team to meet customer requirements; We provide quality assurance for all products.

 

 

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.