CS series unit cooler which also called ceiling mounted evaporator or air cooler is made of single 500mm lose nosie,high air flow axial fan, we also supply multichoice of industrial cold storage refrigeration equipment according your project.

Product Features:

Casing:

Adopt high-quality steel plate with powder coating RAL9003,Hinged structure is adopted for both side plates and external drip tray, which is convenient and quick to operate.

Heat Exchanger Coil:

Copper tubingφ12,spacing 38.1×33 or copper tubingφ15,spacing 50×50,Corrugated aluminiumfins,fin spacing 4.2&6.4& 9.0mm.

3 different fin space of 4.2, 6.4, 9.0mm for customer’s choice to meet different temperature requirement of the room.

Axial Fans:

External rotor motor with high wind pressure,working ambient temperature -40~60℃, High air duct design with Integral stretching, good ventilation effect, further airthrow, lower noise. Fans individually connected to junction box.Fan bladeφ300,φ400,φ500,φ630,standard 4-pole motor.

Defrosting:

Standard use of electricdefrosting,stainless heating pipes installed in the middle of coil and inner water plate. Independent electric heating tube junction box.Hot gas defrosting or coil hot gas defrosting & water plate electric defrosting can also be used.

Refrigerants:

It can meet the requirements of R404A, R507A, R448A, R449A, R134a, R22 and other refrigerants.

500mm axial fan(one) with fin spacing 4.2MM industrial evaporator product items: