A fiber optic HDMI cable is a cable using optical fiber as the transmission medium,the principle of the cable is to integrate the photoelectric conversion line at the hdmi interface and use the fiber optic as the transmission medium material; during the transmission process, the hdmi optical fiber transmitting end converts the hdmi signal into an optical signal and transmits it to the hdmi fiber optic through the optical fiber medium line receiving end, the receiving end then converts the optical signal into a lossless hdmi signal and outputs it to the display device.

3G Video SFP optical transceiver module, support 1080P 60HZ video and up to 80 km transmission. It works in optical video transmission.

CWDM MUX DEMUX,Multiplexing up to 18 Channels on Fiber Pair 1% Monitor Port for Signal Analyzing or Troubleshooting Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks

Epoxy coated keyfobs are a fun and convenient alternative to RFID fobs.They are produced of variety of materials and surface made of import crystal epoxy.Epoxy housings protect advanced integrated chips,such as Fudan F08,MF classic 1k,4k,MF desfire,Ntag 213,215,216 etc.Customized shapes and attractive printing make them perfect for payment retail,transportation, education, and entertainment applications.

ABS RFID key fobs are designed with different size and shapes.They are typically used as an employee badge for door access or permit to areas such as public transportation,apartment and hotel rooms，e-payment, and more.We can provide RFID key fob 13.56MHz ( the most popular is Mifare RFID key fob ), RFID key fob LF（125Khz）, UHF RFID key fobs and Combi RFID key fobs.

2.0" tft lcd screen display 240x320 resolution tft lcd 8bit parallel MCU interface

The input voltage of this outdoor led driver 24v is 180-265vac. This triac dimmable led power supply 5 amp has the certification of CE SAA FCC RoHs and 5 years warranty,has advantages over tauras 120W led driver in the certificate

UHF anti-metal ABS RFID tag is suitable for attaching to metal surface and working normally. It has a good waterproof property, and the protection level reaches IP65. The internal antenna is specially designed, which can be fixed on metal surfaces.

MPO/MTP Fiber Optic Cassette Box is usually the connection of trunk cable and the next MPO/MTP cassette in distribution area of MDA, IDA or HDA data centers. It could be installed 1pc or 2pcs of 0.9mm MPO/MTP-LC harness patch cord 12C inside.

ABB DO86-16 DIGITAL OUTPUT New and factory original in anti-static bag with individual sealed inner box.

1. Colorful ticket dispenser can be choose 2. can print logo on counter ticket dispenser 3. deli number dispenser support 2 digis and 3 digits paper roll

BACHMANN DPM200 sale online Email Me：sales6@askplc.com

The 15W WallPack light has a modern look. It provides efficient lighting which makes it perfect for commercial or home use.

The item SMT-012-100VTSP is 12vdc 100w triac dimmable led driver with very thin size 330*30*22mm,it's plastic case(IP20) suit for indoor,and it's wide range of applications,such as Acuity Brands Hotel Lighting,Commercial Lighting,Venue Lighting.

Designed for input 9(18)-36V,36-75V DC/DC Converters, with features of Quarter brick size and High efficiency up to 93%.

2.8 inch 240X320 TFT LCD display with ST7789V controller

Easy Structure, Mini Body, 3 Terminal, Vertical Handle,1 Pole 3 Position, Sliding Knob Actuator.

Active harmonic filter is connected in parallel with non-linear loads, and uses one set of CT to detect the load current. It calculates each order harmonic current by FFT algorithms in its DSP microchips, and then generates a compensating current with the same amplitude but opposite phase angles to the detected harmonic current, which cancels out the original load harmonics.Not only eliminates harmonic current from the load side, but it also mitigates harmonic voltage caused by harmonic currents. The AHF system can also improve power factor (PF) and correct load imbalances in the power system.

35KV APFC panel (automatic power factor correction)/group reactive power compensation systems are used everywhere that motors are still directly operated without power electronics, or other consumers with a low inductive cosφ place strain on the grid with reactive power in addition to their active-power requirements. Local supply of this reactive power by means of compensation systems relieves the burden on the supply grid and reduces losses.

Dimension: 115x70mm