Electrolysis oxygen generator
Customer satisfaction is the top priority for zxdh2.com!
Cares about customer expectations and problems, fulfills commitments quickly as desired and offers quick solutions to problems.
Believes that the superiority of the support provided is based on predicting the demands of customers.
Provides absolute consistency which maintains its service standards under all conditions.
Our SPECIFICATIONS
-
Using palladium and platinum bimetallic deoxidization catalyst, the deoxidization effect can reach the oxygen content ≤1ppm, and the atmospheric pressure deoxidization effect can also reach the oxygen content ≤5ppm.
-
Adopting high quality molecular sieve with large loading coefficient and high adsorption capacity rate,
-
hydrogen moisture content of the product can be ≤-75℃ dew point.
-
Adopting high efficiency sintered nickel tube filter, filtration efficiency can reach 99.9999%. After dust removal, the molecular particle size is ≤0.3μm.
-
The purification working pressure can be adjusted from 0.8MPa to 3.2MPa, and the maximum processing capacity can exceed the design value by 15%.
-
The amount of regenerated gas is 5%-10% of the processing capacity, and the power consumption is zero. If the raw gas regeneration or the three-tower process is adopted, the hydrogen loss is zero.
-
Fully equipped, the device has compact structure and is easy to maintain. PLC+ touch screen (or industrial computer) -- automatic operation.
The running state and environment of hydrogen production machine
According to the running state and environment of hydrogen production machine ,
we will help you optimize and upgrade the system, design plans suitable for the operation of the machine,
improve
the monitoring and detection for DCS and PLC, enhance the running
safety and using cycle of hydrogen production equipment,
so that
reduce system failure caused by peripheral equipment (hydrogen
compressor, dryer, PLC controller, etc.) and equipment failure or
accident caused by personnel operation mistakes.
Quality Control