Ethernet patch cables are widely used for lan network,available cat5,cat6,cat7,cat8,etc,with UTP,FTP,SFTP,etc.shielding mode.Please check with us for details.

SZOPT’s SC/APC OptiTap connector cable assemblies provide a cost effective, convenient operation, environmental seal and mechanical protection solution. The design makes the connector has blind-mating function, provides quick installation solutions and has good performance, it can be compatible with all the similar products in market, such as Corning Opitap-SC and H-type connector, Cable can be 2×3.0mm, 2×5.0mm flat drop or 5.0mm and 7.0mm round cable, amored or non-amored. Please reach us for details.

FC/UPC Fast Connector,also known as Field installation connector FC/UPC,or Fast assembly connector FC/UPC, is a new kind of connector that can be used in FTTH project scene. They don’t need polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Furthermore, it doesn’t need the fused fiber. Only need some simple tools,by this way,it can save time and cost.SZOPT can offer you different models for options,please reach us for details.

Fiber optic closures provide a protected area for the spliced sections to live, keeping them away from any hazards. Any of these that come in contact with the wires can lead to damage. Bugs may bite through the protective layers, while moisture can flood the cabling. Even things like vandalism and damage from car accidents can be troublesome. A rugged, hermetically sealed fiber optic splice closure can better protect cables and the sensitive data that runs through them from many of the dangers they face.

Support 2*1000Base SFP ports，16*10/100/1000M Rj45 ports Supportweb、telnet.console,SNMP v1/v2c/v3 configuration management ,remote online upgrade

LC/APC Fast Connector,also known as Field installation connector LC/APC,or Fast assembly connector LC/APC, is a new kind of connector that can be used in FTTH project scene. They don’t need polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Furthermore, it doesn’t need the fused fiber. Only need some simple tools,by this way,it can save time and cost.SZOPT can offer you different models for options,please reach us for details.

This QSFP+ QSFP28 transceiver module is a high performance module for short-range duplex data communication and interconnect applications.

MPO/MTP Trunk Cables 12/16/24 Core is type of multitcore cable assemblies facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environment, reducing network installation or reconfiguration time and cost.MTP/MPO are used to interconnect cassettes, panels, or fan outs using a compact and rugged microcables structure. The compact cable optimizes cable way use and improve airflow.These MPO/MTP cable are build with the highest quality components , Low loss elite(premium) versions are offered accordingly,please contact SZOPT for details.

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

*Medical Grade TPV,SILICONE, TPU Material . *Comply With 134 Degrees High Temperature Disinfection. *Applied To Surgical arthroscope, Endoscope, Gastroscopy, Microendoscope, Enteroscopy, Endoscopy.

UTP Cat5 Cat6 Cat7 Lan Cable is a popular UTP network cable or ethernet cable for lan field with full category,please reach us for details.

MPO MTP Trunk Cable 12/16/24 Core is type of multicore cable assembly facilitate rapid deployment of high density backbone cabling in data centers and other high fiber environment, reducing network in stallation or reconfiguration time and cost.MTP/MPO are used to interconnect cassettes, panels, or fan outs using a compact and rugged microcables structre. The compact cable optimizes cableway use and improve airflow.These MPO/MTP cable are build with the highest quality components , low loss version,elite(premium).

Fiber Adapters (Mating Sleeve Fiber Adapter or Standard Fiber Adapter or Bulkhead Type Fiber Adapter) also called fiber adaptors,are used to link optical cables or device. Usually they are female to female,or female to male. SZOPT’s fiber adapters are mainly with ceramic sleeves, but phosphor bronze sleeve is an option for some special requirement.

FBT coupler is a type of optical power management device that is fabricated using Fused Biconical Tape technology.It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.SZOPT provides a whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE.Both tree and star type inline couplers/splitters are available.Our items provide a reliable solution to split/combine signals.Single,dual,and tripple wavelength windows(1310/1490/1550nm) are available.

CWDM MUX DEMUX,Multiplexing up to 8 Channels on Fiber Pair 1% Monitor Port for Signal Analyzing or Troubleshooting Passive, Protocol Transparent for Ethernet, FC, OTN, SONET/SDH, etc. Fully Compatible with All ITU-T 1G/10G/25G CWDM Optics Applied to Metro, Regional CWDM Networks

SC/UPC Fast Connector,also known as Field installation connector SC/UPC,or Fast assembly connector SC/UPC, is a new kind of connector that can be used in FTTH project scene. They don’t need polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Furthermore, it doesn’t need the fused fiber. Only need some simple tools,by this way,it can save time and cost.SZOPT can offer you different models for options,please reach us for details.

OPPC is a type of power composite cable that combines optical fiber unit and traditional phase structure in the wire, it makes full use of its own line power system resources, particularly the power system resources, particularly the power distribution network system, to avoid conflict with the outside world in aspects such as frequency resources, routing coordination, electromagnetic compatibility, which gives it dual functions of power transmission and communication.

Capacity: 38Ah~150Ah DC Voltage:12V Product Introduction: SP series VRLA battery uses AGM technology and high-purity raw materials. Its good floating back up and large current discharge performance makes it optimal and economical choice for UPS/EPS.

Product Name: Air conditioner for data centers Type: Rack or Column

Replacement rechargeable 7.4V LI-ION with of walkie talkie battery pack BP-227L for ICOM IC-F50 IC-F50V IC-F51 IC-F51V IC-F60 IC-F60V IC-F61 IC-F61V IC-F61M IC-V85 IC-E85 IC-M87 IC-M88 IC-F88 two way radio. Advanced alternatives to old batteries, let your walkie talkie take on a whole new life.