Analog mobile radio has never been so cost performance as with the KT-8900R. Use the power amplifier of freescale from USA, launch more stable, communication distance more distant. The QYT KT-8900R is an easy to use, tri band mobile with simultaneous receive as 25 Watts output on VHF and 20 watts on UHF. The mini size, simple design, excellent quality and full-range VHF 136-174MHz 240-260MHz and UHF 400-480MHz allowing you to enjoy the fun of ham radio with your friends.

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

Topscomm single/three phase power line carrier (PLC) communication module is developed on TCC081 series of PLC chips.

IL<3.5dB , 100GHZ DWDM AAWG Technology Multiplexing of 40 Channels over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Support Metro, Regional and Long Haul DWDM Networks

Adapter type fixed attenuator is the female to female fixed fiber optic attenuator,whichutilizes the air gap between two connectors to achieve the optical attenuation. Fixed adapter type attenuator is simple, low-cost and compact. It is recommended for use where return loss is not a concern nor is absolute attenuation value.

EDFA BA LA PA Low noise figure：typical 5.0dB High flatness: typical 1dB Cover whole C-Band: carrie 40 or 80 chs

The 5G CPE brings the new way to enable you experience VR/AR/4K/8K streaming freely and easily. With 802.11ax (Wi-Fi 6) technology built-in, the single CPE has wider wireless coverage and more bandwidth. Meanwhile the CPE brings higher security, better network efficiency and longer battery life.

5G Hybrid Cable is for the purpose of 5G base station,with good mechanical&optical performance,stable&durable.The all-dry hybrid cable structure offers the transmission and power supply for RRU equipments.

Variable in-line optical attenuators,also know as adjustable in-line optical attenuator or short as VOA, are used to permit dynamic control of optical power levels in a fiber. It can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter. Furthermore, they can the used in optical amplifier systems to balance the gain across the different operating wavelengths.

DTSK1710 series Three-Phase Smart Energy Meter, developed and produced by Qingdao Topscomm communication co., LTD., are a new generation of high-end smart energy metering products.

5G CPE SIM Card WiFi-6 Router System supports 5G network, you will be able to customize your network with the required features such as low latency for ultra-smooth gaming, high bandwidth for easy VR/AR/4K/8K experience, etc. Faster upload speeds embrace a whole new experience.

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

16 OTAPs Network Optical Taps， Support 8 lines traffic copy Low insertion loss – minimize impact on data flows Fully passive – monitoring infrastructure does not impact network availability Does not modify traffic – tools see real copies of the packets from the network Requires no power and does not have an IP address, providing safety from remote attacks Cost effective – avoid costly expenses managing SPAN ports

IL<3.5dB , 100GHZ DWDM AAWG Technology Multiplexing of 20 Channels over a Single Fiber Bidi Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks

Optical transmission system LAN light source/detector auto exchange and optical sensor monitoring system Optic fiber, Optical passive components, Optical network and cable testing

Low insertion loss High Extinction Ratio High channel isolation High stability and reliability

1.25G SFP optical transceiver module, support 1.25Gb/s and up to 120 km transmission, including: SFP SR, SFP LR, SFP ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on.

Indoor Hybrid Cable is for indoor installations that utilize a centralized power supply to remote power and devices, thus eliminates the need to provide local AC power to each location.The two copper wires provide power from a centralized power supply to end devices while fiber optic elements provide bi-directional data paths through the cable.

Analog mobile radio has never been so cost performance as with the KT-8R. Mini color screen, quad band , quad standby,. Suitable for various scenarios. The mini size, simple design, excellent quality and full-range VHF 136-174MHz(220-270MHz) and UHF 400-480MHz(350-390MHz) allowing you to enjoy all kinds of convenience and quickness.