LMK30UU Flange Linear Bearing. Low Coefficient of Friction. Reliable friction characteristics that do not increase over the life of the bearing.
inner diameter 120mm to 140mm inch tapered roller bearings
UCT Standard duty,Wider inner ring bearing,Setscrew locking,Cast gray iron housing . Cast DUCTILE iron housing available upon request.
Caterpillar Excavator Cat120B Arm Cylinder Seal Kit 0995311
reducing your rolling mill cost; improving your rolling efficiency;
MR85ZZ Miniature Shielded Bearing 5mm x 8mm x 2.5mm, the inner diameter is 5mm, outer diameter is 8mm and the width is 2.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
6700-2RS Precision Single Row Radial Ball Bearing Both Sides Rubber Sealed and pre-Lubricated with Grease.
Komatsu Excavator PC200-6S boom Cylinder Seal Kit 707-99-46270
LM4L linear motion bearing, smooth movement, high rigidity and low friction . Item: LM4L Linear Motion Bearing . Type: Linear Motion Bushing . Size: 4mm x 8mm x 23mm . Lead Time: 10 to 60 days . Product Origin: Fuzhou, Fujian, China . Shipping Port: Fuzhou, Ningbo, Yiwu, Shanghai . Payment: T/T, L/C
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite)
LMK13UU Flange Linear Bearing. Low Coefficient of Friction. Reliable friction characteristics that do not increase over the life of the bearing.
LMF20UU 20mm x 32mm x 42mm Round Flange Linear Ball Bearing Bushing
SC12UU Linear Slide Block Unit, Smooth Movement Low Friction, Aluminum Alloy Larger Bearing Capacity for Engineering Machinery Transmissions
jtekt KOYO Bearings 6207 with size 35*72*17mm,and we are produce withi high quality Chrome steel Gcr15,we can provice two type of KOYO color box packing.
allowing greater radial load; carrying high capacity;
stabilizing treatment allowing the bearings to work with temperatures up to 150° C, without dimensional change and distortion;