Bearing 6206 with KOYO brand are very high in quality , with high speed and low noise ,this bearings are widely use in motorcyle and other high speed requested area .
Komatsu Excavator PC120-3 bucket Cylinder Seal Kit 707-98-36110
The code of Insert ball bearing with set screw is uc200 series (light series), uc300 series (heavy series) and UB (sb) 200 series. If the application environment is small, uc200 series is usually selected on the applications,, otherwise uc300 series is selected. Generally, there are two jackscrews on the spherical surface ball bearing, with an included angle of 120 °.
allowing working temperatures up to 150° C, without any particular dimensional change
MR63ZZ Miniature Shielded Bearing 3mm x 6mm x 2.5mm, the inner diameter is 3mm, outer diameter is 6mm and the width is 2.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed.
This product is High Precision Have Large In Stock Horizontal Open Type Slewing Drive. The open base is adopted, the tooth surface is easy to maintain and the cost of the whole machine is reduced.Using special machine tools to produce hourglass worm, multi tooth contact, transfer larger torque, and be able to bear larger axial force, radial force and tipping torque.The product design adopts the general dimensions at home and abroad, and is replaced later.
professional manufacturer of bearings for steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc. P6 precision for higher wear-resistance best bearing steel to ensure the bearing can work under highest loads ready stock available
Komatsu Excavator PC200-8 boom Cylinder Seal Kit 707-98-46280
608zz Customized Plastic Pulley With Bearing with material Chrome steel and nylon PA66 are produce as customer requirements with size 6/11.76*30.20*9.3mm,the bearings are widely usedin sliding roller door and sliding roller wheel
1.We can provide best quality of INA insert ball bearing 2. we can supply different bearing number 3. Free sample available for you 4.Fast delivery time 5. Best service
The light slewing bearing is one major model produced in our factory and its mainly used in food machinery, canning packing machinery and environmental machinery etc.
Komatsu Excavator PC220-5 bucket Cylinder Seal Kit 707-98-47620
applicable for work rolls and back-up rolls in rolling mills;
All bearings are available in 52100 Chrome Steel or 440 Stainless Steel. Bearings also available with single shield or seal: suffix Z, RS, RU or TS. TTS is used smaller ball, load rating is lower than standard.
XKAH-00434 bearings are used in the final drive Bearing system of HYUNDAI heavy machinery equipment: XKAH-00434 HYUNDAI BEARING parts Apply to R180LC7, R180LC7A, R210LC3H, R210LC7, R210LC7A, R210LC7H, R250LC7, R250LC7A, RC215C7, RC215C7H
MR137ZZ Miniature Shielded Bearing 7mm x 13mm x 4mm, the inner diameter is 7mm, outer diameter is 13mm and the width is 4mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Hanger Bearing Units is one design of mounted ball bearing unit, UCHA2 is the suffix of this type bearing unit, the bearing unit have UC chrome steel pillow block bearings and HA housing with cast iron materials.
Radial/Deep Groove Ball Bearing - Round Bore, 10 mm ID, 19 mm OD, 5 mm Width, Double Shielded, C0 Internal Clearance