Komatsu Excavator PC200-5 bucket Cylinder Seal Kit 707-98-45220

MR128ZZ Miniature Shielded Bearing 8mm x 12mm x 3.5mm, the inner diameter is 8mm, outer diameter is 12mm and the width is 3.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.

The insert ball bearing is a variant of the deep groove ball bearing. the outer diameter surface of the outer ring is spherical, which can be fitted into the corresponding concave spherical surface of the bearing housing to play the role of centering. The insert ball bearing is mainly used to bear the combined radial and axial load, which is mainly the radial load. Generally, it is not suitable to bear the axial load alone

LMK20UU Flange Linear Bearing. Low Coefficient of Friction. Reliable friction characteristics that do not increase over the life of the bearing.

specially designed for steel industry; popular for use on roll necks;

UCP200 series Pillow Block Mounted Bearing Unit: Two bolt, pillow block, mounted bearing units, cast iron housing, inch or metric dimensioned shaft sizes.

VOE11701338 bearings are used in the dump truck Bearing system of VOLVO heavy machinery equipment： 11701338 BEARING Volvo parts A25D A25E A25F A25F/G A25G A30D A30E A30F A30F/G A30G A35C A35C VOLVO BM A35D A35E A35E FS A35F A35F FS A35F/G A35F/G FS A35G A40 A40 VOLVO BM A40D A40E A40E FS A40F A40F FS A40F/G A40F/G FS A40G A45G A45G FS A60H T450D

6200RS (10x30x9mm) is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability. It comes pre-lubricated and shielded to keep the lubricant in and contaminants, dirt and debris out.

The basic dimensions of FQN tapered roller bearings are listed in the dimensional data sheet, Single-row tapered roller bearings: Inner diameter size range: 20mm～1270mm Outer diameter range: 40mm～1465mm Width size range: 15mm～240mm

By adopting slewing bearing as its corecomponent,slewing drive can bear axial force, radial force and tilting moment simultaneously.

allowing working temperatures up to 150° C, without any particular dimensional change

Four row cylindrical roller bearing for steel plant, working under the toughest working environment;

MR63ZZ Miniature Shielded Bearing 3mm x 6mm x 2.5mm, the inner diameter is 3mm, outer diameter is 6mm and the width is 2.5mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.

RAH7249A HUR056 Renault truck wheel bearing

LMF6UU 6mm x 12mm x 19mm Round Flange Linear Ball Bearing Bushing

Bearings KOYO 32008jr are single row taper roller bearing with size 40*68*19mm, and the material Chrome steel Gcr15 ,we have this bearing with 665 PCS in stock now .

Komatsu Excavator PC120-3 bucket Cylinder Seal Kit 707-98-36110

The light slewing bearing is one major model produced in our factory and its mainly used in food machinery, canning packing machinery and environmental machinery etc.

professional manufacturer of bearings for steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc. P6 precision for higher wear-resistance best bearing steel to ensure the bearing can work under highest loads ready stock available

Komatsu Excavator PC200-6 boom Cylinder Seal Kit   707-99-46600