Description:
AWT-3500 Automatic Water-bath Leakage Tester is used for detecting various aerosol products, not limited by can body materials, The machine(CE-Proved ) adopts explosion proof motor and is equipped with automatic overload breaker to guarantee safety operation.
Working process:
The whole process including: electric heating, temperature-control, automatic clamping,checking, drying, conveying.
When cans entering, the clamp of water-bath tester will hold the can, then put can into hot water at temperature between 45 and 52 for about 3 or 5 minutes, to check whether it is leaking. Then can will go into wind blowing system, hot wind will dry the can body and convey it to conveyer.
Features
Used to testing all kinds of aerosols without limit of can materials.
Production capacity up to 120 CPM,and the products can be 100% tested.
Adopt explosion-proof motor equipped with automatic overload separator, assure safe operation of the complete machine.
The explosion proof electric tubes installed in the water tank can quickly heat the water to the requirement water temperature and automatically control the temperature.
The chains used in the machine are made of stainless steel and the chucking appliance for hanging is fixed firmly, avoiding the danger of becoming loose and falling off.
The machine is also equipped with an automatic blowing .
The submersion clip design allows you to easily see a leaking valve cup while the can is totally submerged.
It is available for 1" valves.
Options
Water bath Hot Wind drying system
Simple Safety Net Cover (Stainless Steel)
Safety outside guarding frame with organic glass
Technical Specifications
Model | AWT-3500 |
Production capacity | 3500-7200 cans/hr |
Main driving head power | 1.1KW |
Water heating power | 55KW |
Type of electric control box and heater | Explosion-proof |
Temperature control accuracy | ±1℃ |
Air source | 0.6Mpa-0.8Mpa clean and stable air source |
Maximum air consumption | 0.6m3/min |
Drying Air Pressure | 0.3-0.6 Mpa |