Four - bar ladling machine can replace manual casting of liquid aluminum.
Product Item
Automatic ladling machine for pouring liquid aluminum
Product Description
Product Features
1.The four connecting rods are driveb by worm gear,and the transducer is adjusted to make the arm run faster and smoothly.
2.The use of imported PLC and frequency converter is used to control the positioning of the soup arm.
3.Human-machine interface touch-screen,can be convenient to set various parameters,real-time monitoring of machine status and fault self-diagnosis display function,make the operation and maintenance is very convenient.
4.The fuselage transmission parts are used in NSK bearing,stable performance and long service life.
5.With probe line alarm function,use safer.
6.The soup is controlled by the encoder and the soup is more precise. The amount of soup can be added and reduced.under manual/automatic condition ,which can reduce the defective rate.
Product parameters
Specification / model
LH-1
LH-2
LH-3
LH-4
LH-5
LH-6
LH-7
Suitable die-casting machine
125-200T
250-350T
400-500T
630-800T
1000-1250T
1600-2000T
2500-3000T
Soup quantity
0.5-2.0kg
1.0-3.5kg
1.5-6.0kg
2.5-8.0kg
6.0-15kg
18-25kg
20-40kg
Soup feeding precision
±2%
±2%
±2%
±2%
±2%
±2%
±2%
Spoon capacity
0.5-2.5kg
1.0-4.5kg
1.5-6.0kg
2.5-8.0kg
6.0-15kg
18-25kg
20-40kg
Inner diameter of crucible
450mm
50mm
550mm
600mm
800mm
850mm
900mm
Furnace wall thickness
300mm
300mm
300mm
350mm
350mm
400mm
400mm
Source
220V
220V
220V
220V
220V
220V
220V
Power supply capacity
2.4KVA
2.4KVA
2.4KVA
2.4KVA
4.2KVA
5.7KVA
5.7KVA
Operation power supply
DC24V
DC24V
DC24V
DC24V
DC24V
DC24V
DC24V
Spoon motor
0.4kw CV-3
0.4kw CV-3
0.4kw CV-3
0.4kw CV-3
1.5kw CV-3
1.5kw CV-4
1.5kw CV-4
Soup arm motor
1.5kw CV-3
1.5kw CV-3
1.5kw CV-3
1.5kw CV-3
2.2kw CV-5
3.7kw CV-5
3.7kw CV-5
Time to serve soup at a time
5 sec
5 sec
6 sec
6 sec
10 sec
12 sec
12 sec
Source
3Φ-380V/50HZ