Sales

Automatic 9 Dip Switch 1min 2Lux On Off Switch Sensor

Product Detail

Automatic 9 Dip Switch 1min 2Lux On Off Switch Sensor

Features of ON/OFF Sensor:

1.Loop in and loop out for easy installation.

2. Automatic On/off control with Daylight sensor

3. Compact sized particularly suitable for Ceiling lights or tri-proof lights.

4. Optional detection range, holdtime and daylight threshold.

5. 5 years warranty.

Setting of ON/OFF sensor:


Detection area(1.2.3)	100%/75%/50%/30%/10%
In this area,movement will be detected and able to trigger the sensor.100% detection area is also known as the strong sensitvity.
Hold time(4.5.6)	5s/30s/1min/5min/10min/20min/30min
The period of light keeping 100% brightness after moving objects leave the detection area.
Daylight threshold(7.8.9)	Disable/80Lux/50Lux/30Lux/20Lux/10Lux/2Lux
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brightness.

Wiring diagram of ON/OFF sensor:

Detection area of ON/OFF sensor:

Typical installation height 2.5-6m, Recommended installation height 3m

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Detection angle	≤150°(Without glass)
Detection range	Diameter 10m*Hight 4m(ceiling mounted)
Motion detection	0.5~1.5m/s
Mounting height	Less than or equal to 6m (ceiling mounted)

Mechanical structure of ON/OFF sensor:


Certificate	RED RoHS CE TUV
Detection area	10%/30%/50%/75%/100%
Setting mode	Remote control(match HD01R,HD02R,HD03R)
Hold time	5s/30s/1min/5min/10min/20min/30min
Daylight threshold	2Lux/10Lux/20Lux/30Lux/50Lux/80Lux/Disable

Dimensions (Unit: mm) of ON/OFF sensor:

Application of ON/OFF motion sensor:

1. Automatically ON/OFF function:

	With sufficient daylight,even when motion detected,light remains OFF.
	With insufficient daylight,when motion detected,light ON.
	After the last detection,and the present hold time elapsed,light OFF.

2. No daylight function

When the daylight threshold is set to "Disable".

Light on when detect movement, After people leave, Light off after stand-by period.

Applications: Dim places such as Basement Parking, Underpass.

	When motion is detected, the sensor will switch on the light to 100% brighteness.
	After people leave the detection area, light remains 100% brightness within hold time.
	After the last detection and the present hold time elapsed, light OFF.