Product introduction: This Automotive Car Paint Lacquer A drying accelerator specially designed for 2K solid color paints and varnishes,It can speed up the non-stick time and drying time of the paint, suitable for For local repair or use at low temperatures.
Applicable bottom material: polished steel, iron, aluminum, galvanized board, and glass fiber reinforcement. Aerobic iron
The plate or cast iron, thoroughly polish and remove the rust corrosion, should be polished until the surface is clean.
| Model NO. | C-505 | Substrate | Steel |
| Certification | ISO14001 | Tin | Matel and Plastic |
| Appearance | Liquid | Level | Finish Coat |
| Main Raw Material | Acrylic | Method | Spray |
| Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
| Shelf Life | 2Years | Qty/CTN | 12tins |
| Trademark | Meklon | HS Code | 320820 |
C-505 1K Sorex Primer
Product Features: Automotive Car Paint Lacquer Quick-drying, easy-sanding one-component mid-coating, quick and easy application, filling power,
It has good hiding power and is used to fill minor defects on the surface of the paint film.
Applicable substrate: Automotive Car Paint Lacquer dried and sanded old paint film or fully cured and sanded putty.
Basic information on C-505 1K Sorex Primer:
1. Surface cleaning: Use a degreasing cleaner to remove wax, oil stains and other impurities
2. The maximum amount of prepared paint per liter shall not exceed 2 caps, otherwise the paint film will become brittle and lose its gloss;
3. The quick-drying liquid cannot be used as a drying agent, but can only be used in conjunction with the drying agent as an auxiliary agent;
Packaging Precautions
1. It is not recommended to spray with thinners with high water content and too fast drying speed;
2. Storage conditions/period: It is recommended to store at 5-35 ℃, and the original cover can be stored for 2 years.
3. Packing specification: 4kg can.
| Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
|
The Mixing Ratio： (Volume Ratio) <15℃ 15-30℃ >30℃ |
Epoxy Primer + Epoxy Hardener + Epoxy Thinner 5 1 1-1.5 C-508 Epoxy primer Use Quick-Dryin Type C-508 Epoxy primer Use Standard Type C-508 Epoxy primer Use Slow-Drying Type |
| Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
|
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber：1.6mm Air Pressure:1.8-2.0(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
|
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
1-2 Level,15-20um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 15-20 Miuntes ,Spray the Varnish |
Customer Feedback
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
