Sales

Anticorrosive coating for towers is a two-component, thick-type, one-side polyurethane acrylic coating with excellent weather resistance and long recoating performance. This product has both anti-corrosion, weather resistance in one, with excellent wear resistance, impact resistance, color retention and aging resistance.

Product Detail

Product Features

The construction is safe and convenient, and the surface treatment requirements are low

Primer painting and finished painting designing into one, cost-effective, save labor and materials

Environmental friendly and pollution-free, in line with the international environmental protection requirements

Applications

Anticorrosion protection of steel tower structure in new construction or maintenance
Anticorrosion protection of other steel structures in various corrosive environment

Technical Parameters

Test Item	Test Standards	Typical Value
Appearance	JG/T 224-2007	Gray
Solid content, (%)	GB1725-79	55
surface dry,（h）	GB/T 1728–1979(1989)	1.5
Entity dry,（h）	GB/T 1728–1979(1989)	5.5
Adhesion (grid method/grade)	GB/T 9286-98	0
Bending resistance (mm)	JG/T 224-2007	2
Impact resistance (mm)	JG/T 224-2007	40
Resistance to water	GB1733-93	168h no abnormalities
Aging test	JG/T 224-2007	no crack, powder ≤ level 1; Discolor≤ level 2
Resistance to salt spray	JG/T 224-2007	750h no flake no red rust
Acid resistance (5%H2SO4)	JG/T 224-2007	500h without exception
Salt resistance water (3%NaCl)	JG/T 224-2007	500h without exception
Workability.	JG/T 224-2007	Brush two lines without obstacles
Environmental performance	RoHS 2.0	Qualified

Direction for Use

1, Surface treatment: Clean up rust, burr, oil, dust, the surface should be flat, dry, no loose floating rust, old coating film, oxide scale, rust removal grade should reach ST2 level and above.

2, A, B components in accordance with the use of the proportion of mixing, stirring uniform can be constructed, according to different construction methods and site environmental conditions in the paint to add the appropriate amount of diluent deployment to the appropriate viscosity, so that the paint can be fully infiltrated but does not produce leakage, hanging, loose, peeling and other defects.

3, The tower site coating construction should be carried out from top to bottom. The coating method can be applied by brushing or spraying.

Product Specification

21kg / set (including component A 17.5kg/barrel, component B 3.5kg/barrel)

3kg / set (including component A 2.5kg/ barrel, component B 0.5kg/barrel)

Certificate