The preferred self swab test as short flocked nasal swab test usage,also called as Nylon Flocked Nasopharyngeal Swab for Covid and virus antigen testing purpose.
• High sample collection efficiency due to the unique spray type nylon pile implantation technology.
• ABS swabstick with different breakingpoint, easy to operate and no interfere with PCR testing.
Product Name
Disposable specimen collection swab as short flocked nasal swab test usage,also called as Nylon Flocked Nasopharyngeal Swab for Covid and virus antigen testing purpose.|Anterior nasal swab (Lateral Flow Antigen swab / Self swab/Antigen Swab Test/Nasal Swab Test/Sampling Flocked Swab/Swab Test Kits/Anterior Nasal Swab)
Intended use
Used for various virus specimen collection as sampling swab (i.e. COVID-19, flu, swine flu, HFMD, enteric virus and other respiratory virus sampling).
short Disposable sampling swab (Individually wrapped) made from ABS stick and nylon tip - Anterior Nasal Swab (Lateral FlowAntigen swab / Self swab)
Total Length of Lateral FlowAntigen Swab |
9cm |
||
The material for the flocking | PA66 | ||
The material for the stick |
ABS | ||
The length for the flocking |
20±5mm |
Cat No. | WS1010A | WS0101B | WS1012A | |
Specification |
Anterior Nasal Swab |
Anterior Nasal Swab / Anterior Oral Swab |
|
|
Breakpoint Length |
5cm |
3cm |
3cm |
|
Flocking Diameter |
3mm |
4mm |
5mm |
|
Image |
|
|
|
Transportation and storage at room temperature, valid for two year.
• Instructions should be read and followed carefully.
• Wear suitable protective clothing, gloves, and eye/face protection while handling.
• Do not use the sample preservation medium for pre-moistening or pre-wetting the applicator test swab prior to collecting the sample or for rinsing or irrigating the sampling sites.
• Disposable device, do not reuse.
• Do not touch the applicator in the area below the test swab breakpoint indication line.
• Do not use if the swab is visibly damaged.
• Wash hands thoroughly after handling.
Step 1:Peel the package.
Step 2:Collection of the sample:
• To collect a nasopharyngeal sample:
Tilt patienfs head back 70 degrees. Gently and slowly insert the test swab through the nostril parallel to the palate (not upwards) until resistance is encountered or the distance is equivalent to that from the ear to the nostril of the patient, indicating contact with the nasopharynx. Gently rub and roll the test swab and slowly withdraw while rotating it.
• To collect a oropharyngeal/throat sample:
Insert the test swab into the posterior pharynx and tonsillar areas. Rub swab over both tonsillar pillars and posterior oropharynx and avoid touching the tongue, teeth, and gums. Stop for several second to absorb secretions and then slowly remove the test swab while rotating it.
• To collect a anterior nasal swab / self swab / Lateral Flow antigen swab sample:
Insert the entire collection tip of the anterior nasal swab provided (usually%to%of an inch, or 1 to 1.5 cm) inside the nostril. Firmly sample the nasal wall by rotating the Lateral Flow antigen swab in a circular path against the nasal wall at least 4 times. Take the test swab approximately 15 seconds to collect the specimen. Be sure to collect any nasal drainage that may be present on the Lateral Flow antigen swab. Repeat in the other nostril using the same Lateral Flow antigen swab and withdraw the Lateral Flow antigen swab.
• To collect a anterior oral / self swab / Lateral Flow antigen swab sample:
Hold the stick and gently insert the test swab into the oral cavity, rotate about 5 times to ensure sufficient sample collection and withdraw the Lateral Flowantigen swab.
Step 3:Quickly put the test swab into the tube. Break the test swab at the breakingpoint, discard the handle end and tighten the pipe cover.
FAQ
Q1: What's your advantage? Why we choose you?
A: We are professinal source manufacturer in China. We have 3000m2 100,000-level standardized purification workshop with strong manufacturing ability and we have high value with competitive price.
Q2: What ls your payment term?
A: Payment term ls T/T in advance.
Q3: Do you have any certificates?
A: We have passed ISO 13485 Quality Management System certification, and we have ave obtained CE certifications and all the certificates required for export and local import custom clearance.
Q4: Where is your main market located?
A: 60% in Europe, 30% in Middle East and 10% in South Africa
Q5: What's your lead time?
A: For mass production, we deliver by batches and first batch can be delivered within 10-15 days after payment.
Q6: Do you support OEM/ODM?
A: YES, we can prototype and customize the ideal product according to your specific application.
Q7: How is the product package
A: Every unit is individually packed, and store in box and carton, we can also pack 12-18 cartons in one palletes for stable transportation.