Horizontal cold chamber die casting machine is widely used in many fields. For example: means of transportation, household appliances, decorations, hardware, public facilities, furniture, toiletries and so on.
Aluminum Die Casting Machine For Making Brake Pads
Five major systems of die casting machine:
1. Circuit system
Mitsubishi, omron touch screen integrated control, so that the set of higher stability, alarm content prompt can be quickly troubleshooting.
2. Modulating system
Adopt omni-directional gear hydraulic adjustment to ensure permanent parallel of fixed and moving formwork.
3. Mold locking system
The formwork and hinge are made of high strength ductile iron
Production process.
4. Furnace system
Selection of equipment: diesel furnace, coal stove, electric heating.
5. Discharge system
The most advanced pre - injection circuit is adopted to improve the injection speed and efficiency.
Reduce the build up time of the system.
LH series of standard parameter table (180T)
Items |
Unit |
Specification |
Hydraulic Working Pressure |
MPa |
14 |
Clamping Force |
KN |
1800 |
Space Between Tie Bars |
mm |
480*450 |
Tie Bar Diameter |
mm |
¢85 |
Die Opening Stroke |
mm |
380 |
Injecction Force(intensify) |
KN |
270 |
Plunger launch distance |
mm |
130 |
Injection position |
mm |
0 -- 140 |
Plunger Diameter |
mm |
¢50----¢70 |
Injection Stroke |
mm |
350 |
Casting pressure (intensify) |
MPa |
112/78/57 |
Casting Fiange Protrusion |
mm |
10 |
Casting Fiange Diameter |
mm |
110 |
(40Mpa) Max Casting Area Under40Mpa |
CM2 |
450 |
lnjection Weight(Al) |
Kg |
2.4 |
Die Height(Min--Max) |
mm |
200~550 |
Ejector Force |
KN |
110 |
Ejector Steoke |
mm |
80 |
Motor Capacity |
Kw |
15 |
Machine Dimensions (L*W*H) |
m |
5.22*1.4*2.35 |
Referential Machine Weight For Uplifting |
T |
6.7 |
Oil Tank Capacity |
L |
600 |
WE reserve the right to make any technical improvement without further notice
Die casting machine products/die castings:
Die-casting products are also known as die-casting pieces. Below is the picture of our machine die-cast products, including: LED lamp shell, electric housing, radiator, high voltage cable card, door handle, art knife case and so on.