Adjustable Hillside Ground Terrace Photovoltaic solar ground structure is suitable for slope concrete roof or slope solar photovoltaic project, with strong wind and snow resistance. Through the special anchor plate design, the system can realize the fine adjustment on site to adapt to different sites.
Adjustable Hillside Ground Terrace Solar Bifacial Photovoltaic Mounting Bracket
The Adjustable Hillside Ground Terrac solar ground mount can be adjusted from East-West and North-South directions, with special connector design. Patented and certified system design ensures safe and fast installation of the project.
System Structure
Technical Parameters
System Name |
bifacial solar structure system |
Panel Layout |
Landscape or Portrait |
Foundation |
Ground Screw,Concrete Based |
Material |
Anodized AL6005-T5 |
Tilt Angle |
0-60degrees |
Fastener |
SUS304 &Zinc-Nickel Alloy Electroplated Steel |
Snow Load |
1.6KN/㎡ |
Color |
Customized or Silver |
Wind Load | 60m/s |
Design Standard |
AN/NZS1170,DIN1055,JIS C8955,etc. |
Applicable Solar Module |
Framed or Frameless |
Warranty |
10 Years |
Ground Clearance | 200-2000mm | Small Components | Anodized AL-6005-T5 |
Components Details
Splice for Cross Beam kit Specification:L260mm Components:Splice for Cross Beam,Hexa Self-Tapping Screw with EPDM Washer ST6.3*19
|
Specification:L*71*85 Standard Length:3100mm,4100mm,5100mm |
Pre-Assemble Support
Components:Cross Beam ,C Clamp Kit , T Back Jointer,Flat Washer M8, Spring Washer M8
Hexagon Bolt M8*25
|
T Adjustable Anchor Plate Kit
Material:AL6005-T5(Anodized ) Can adjustable up and down & left and right
|
Wide End ClampKit
Components:Wide End Clamp, Cross Module, Spring Washer M8,Hexagon Socket Bolt |
Inter Clamp Kit Components:Inter Clamp,Cross Module Spring Washer M8,Hexagon Socket Bolt |
C Clamp Kit
Components:C Clamp, Cross Module,Spring Washer M8 Hexagon Socket Bolt |
Corrugated T Anchor Plate Kit Components:Corrugated Gasket,Corrugated T Plate Hexagon Bolt Kit Material:AL6005-T5(Anodized ) |
Installation Guide
1.Install ground screw based on project solution.
2.Install Pro-T Corrugated Anchor Plate.
3.Install rail.
4.Install Back Side Support.
5.Install T Adjustable Anchor Plate Kit.
6.Install Beam.
7.Fix the solar module with Inter Clamp Kit & End Clamp Kit.
8.Installation is done.
Free Design Service
We provide free customized design service for solar ground mount.
Regarding better service, please provide below detail before design.
1. The dimension of the solar panel: _________(L*W*T)
2.What is the installation angle?: _______degree.
3.How is weather there, such as wind speed and snow load?___m/s anit-wind speed and____KN/m2 snow load
4.The pv array?_____
5.Which foundation you need for your coming ground mounting system? ______( ground screw/concrete/pile/pole )
6.The height of panel lowest end off ground?______
7. How many panels do you plan to install for the project?______pcs.