Adjustable dual flush valve in wall concealed cistern

Cistern Details

Technical Informations:

1.Dual flush, can be adjusted to 3/4.5、3/6、4/7 litres，the structure and capability of cistern conforms to EN14055 standard.

2.Two button control plate, below CJ501,CJ502 and CJ503 are available for choice；

3.The stop valve is available for closing down the water head while maintenance.

4.Tank is made of HDPE by blow moulding with very high strength and anti-aging capability. With high intensity of EPS insulation shell bonded to the exterior of cistern to prevent the formation of water condensation.

5.The inlet valve is designed with very low noise, conforms to EN14124 standard.

6.Suitable for wash-down wall-hung toilet pan，and fixed distances 180mm and 230mm are available for choice.

7.Tubular steal (40*20*2.5) frame,for free-standing(full-standing) installation, coated with epoxy paint, having strong resistance to corrosion, with load of 400kgs, conforms to EN997 standard.

8.Maintenance access can be achieved through the rear window of the control plate to install and dismantle the fill and flush valves. Water supply can be partial closure for maintenance.

9.Supply bend is made of PP, with spec DN90, can be changed to DN110 or DN100 by an available connector, Joints with rubber sealing connector, easy to dismantle.