> Built in LED, door sensor and time delay> Single door 350KG=800lbs> Voltage: DC12V and DC24V(adjustable)> Holding Force: 380KG(800Lbs)> Current Draw: 12V/500mA 24V/250mA
> Card type: EM Card > Keypad Characteristic: Infrared remote controller operation. > Admin Card: Add and Delete cards > User Capacity: 10,000 card users, 1000 facial users
> Fingerprint Capacity: 500> User Capacity: 2500> LCD: 1.7 inches TFT colour screen> Work with 4pcs 1.5V “AA” alkaline battery> Fingerprint Sensor: SemiconductorSupport: Fingerprint+EM 125KHz Card+Pincode
Door position detection and bolt position (N.C. & N.O.)output points> Power Supply: DC12V> Operation current: 880mA
> Card type: EM Card> Full programming from the keypad> WG26 Input/output> 2000 uses, supports Card, PIN, Card + PIN> Digital backlit keypad> Red, Yellow, and Green LEDs display the working status
Signal Output: door open or door close state detectionwith output point, NC/COM
> Without door position detection output> Voltage: DC12V or DC24V> Holding Force: 180kg(350Lbs)> Current Draw: 12V/480mA 24V/240mA
> Dimension: 55x40.2x19.1mm> Voltage: DC12V> Current: 40mA> Time: 0~30S
> Wire diameter: 13mm> Door loop length: 470mm> Inner Diameter: Support 4pcs 6mm cat6 wires
> Frequency: ISM 902~928MHz or 860~870MHz> Protocol: ISO18000-6B, ISO18000-6C (EPC GEN2)> Size: 243x22x10mm
Work with ACB-R01, ACB-R02, ACB-R04 control board only
Work with all Kind of Single & Double Smokeproof Doors> Dimensions: 50x65x90mm> Holding Force: 60kg(110Lbs)
EL-350D (Without Signal Output)> Voltage: DC12V and DC24V (adjustable)> Current Draw: 12V/300mAx2 24V/150mAx2> Lock Size: 340Lx41Wx21H(mm)> Armature plate: 130Lx33Wx9.3H(mm)> Holding force: 180KGx2 (350lbsx2)
> Card type: EM Card> Metal case, anti-vandal> Capacity: 200 fingerprints and 500 cards> Two accesses: card, fingerprint> Fingerprint access controller and reader, WG26 Input/output
> Card type: 125KHz or 13.56MHz Card> PCD-102EM: 125KHz (WG26 output)> PCD-102Mifare: 13.56MHz (WG34 output)