> 433MHz Rolling Code technology> Card type: 13.56MHz Mifare card> Programmable Wiegand output of the> Receiver: 26 bits or 34 bits> Communication distance: 30m maximum> Ultra-low power consumption> Waterproof, conforms to IP65
> Power Supply: DC12V; DC24V> Operation Delay Time: 0sec., 2.5sec., 5sec., 9sec.> Holding forces: 600lbs> Weight: 3kg
> Card type: EM Card> Full programming from the keypad> WG26 Input/output> 2000 uses, supports Card, PIN, Card + PIN> Digital backlit keypad> Red, Yellow, and Green LEDs display the working status
EL-350D (Without Signal Output)> Voltage: DC12V and DC24V (adjustable)> Current Draw: 12V/300mAx2 24V/150mAx2> Lock Size: 340Lx41Wx21H(mm)> Armature plate: 130Lx33Wx9.3H(mm)> Holding force: 180KGx2 (350lbsx2)
> Card type: 125KHz or 13.56MHz Card> PCD-104EM: 125KHz (WG26 output)> PCD-104Mifare: 13.56MHz (WG34 output)
Door position detection and bolt position (N.C. & N.O.)output points> Power Supply: DC12V> Operation current: 880mA
> User capacity: 500> Communication: RS485 port> Dimension: 145x80x30mm> Working with master machine TFS30 only
> Card type: EM Card> Access ways: Card, code, card + code, Mobile APP> Protocol: Wiegand26 Input/Output> Searching time: Less than 0.1s after reading card> Backlight keypad: Easy to operate at night> Doorbell interface: Support external wired doorbell
> Card type: EM and HID Card> Waterproof conforms to IP66> One relay, 1000 users> Wiegand 26~37 bits input & output> User data can be transferred by Wiegand line> Access modes: Card, PIN, Card + PIN, Multi Cards/PINs> Card type: 125KHz Hid & EM card, PIN length: 4~6 digits> Pulse mode, toggle mode> 2pcs device support interlock for two doors
> Card type: EM or MF Card> Metal structure design, anti-vandal> Digital backlit keyboard> All-in-one, WG26 output/input> Three-way to open the door, card, password, card + password> The doorbell button and interface: buttons and isolation circuit, connect to any external bell
No Need wires from Access Controller to Keypad to Exit Push button> User Capacity: 500users support RFID+Pincode> Communication Frequency: 2.4G> Mini Controller: DC12V> Wireless Keypad: 3units of AAA batteries> Wireless Exit Button: 2023 Lithium battery> Communication distance 15M Maximum
Four-door RS485 access Control board with free software to manage userscontrol 4doors, support 4pcs RFID access reader and a 4pcs exit button for In and Out
> Card type: EM or MF Card> User Capacity: 2000> Card Reading Distance: 3-6 cm> Size: 117x71x22mm
> Without indicator lights> Voltage: DC12V and DC24V(adjustable)> Holding Force: 500KG(1200Lbs)
> Card type: EM, HID, MF, CPU Card(Factory default: EM 125KHz)> Operate by infrared remote> 10,000 card users and 300 fingerprint users> Relay NO/NC/COM output
> Card type: EM Card> Access ways: Card, code, card + code, Mobile APP> Protocol: Wiegand26 Input/Output> Searching time: Less than 0.1s after reading card> Backlight keypad: Easy to operate at night
> Fingerprint Capacity: 500> User Capacity: 2500> LCD: 1.7 inches TFT colour screen> Work with 4pcs 1.5V “AA” alkaline battery> Fingerprint Sensor: SemiconductorSupport: Fingerprint+EM 125KHz Card+Pincode
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
