Flap barriers are cost-effective and space-saving entrance gates, normally used at commercial and industrial places to control the pedestrian flow, such as subway station, museum, school.
> Material: 304 Stainless Steel> Dimension: 65x15.5x5cm 100x15.5x5cm
> CB-90-C: DC12V 0.3A> CB-90-D: DC24V 0.2A> Lock size: 54 x 22 x 28mm> Working Mode: Power on to Lock Power off to Unlock> Suppot Power on all the time
>Electrical parameters: maximum power 10W, maximum voltage 100V, maximum current 0.5A>Switch form: NO-Normally Open / NC-Normally Close / NO+NC>Current/Voltage/power: 0.1A /100VDC/ 3W
> Built in LED, door sensor and buzzer> Holding Force: 280KG (600Lbs)> Voltage: DC12V and DC24V> Lock Size: 250Lx48.5Wx25H(mm)> Current Draw: 12V/500mA 24V/250mA
>Working voltage: DC12V/24V>Working current: 170ma>Input voltage: DC12V /24V>Suction: 60-80KG
> Material: ABS> Colour: Black> Unlock Way: RFID Card> Working Voltage: DC6V (4pcs AA batteries)> Lock Size: 76*76*29.5 mm
>Unlock Ways: Fingerprint + IC Cards + Mechanical Key>Support Lock Body: Dual Bolt Lock Body>Handle Material: Zinc Alloy ( including decoration circle )
> Voltage: DC12V 1.8A> Lock size: 73 x 58 x 13.3mm> Signal output: No
> Two Accesses: Fingerprin, Pincode> Waterproof, conforms to IP66 > Metal case, anti-vandal > One Programming relay output > Multi-color LED Status Display> PIN length: 4~6 digits> Integrated alarm & Buzzer output> Capacitive Fingerprint Sensor> 1000 Users: 100 Fingerprint, 890 PIN, 10 Visitor Users
LD-Y603 flap barrier gate is designed as space saving pedestrian access control gate in high throughput areas, it allows authorized entry and block UN-authorized entry, it is a advanced equipment to manage access control in public buildings.
>Working voltage: 12VDC/24VDC>Working current: 170mA/85mA
The sliding turnstile is a kind of electric access control entrance based on the horizontal movement of two glasses gate, when the glass sticks out, a passage will be formed, and when it retracts back, the passage is free to pass.
Parking boom barrier loop detectors are used in combination with vehicle detection loops to detect vehicular traffic traveling or stopping overhead in a roadway.
Work with 4pcs 7 alkaline batteries> Static current ≤5uA> Transient current (Turn on lock) ≤250mA> Work current for operating keypad: ≤20mA> Use time: More than 100 thousand
> Card type: EM, HID, MF, CPU Card(Factory default: EM 125KHz)> Metal backlight keypad> User capacity: 10,000 users> Dimensions: 152x60x24mm> Waterproof IP68
> Card type: EM Card> Metal case, embedded design> Waterproof lP66> User capacity: 100 fingerprints + 890 cards + 10 Visitor.> One programmable relay operation> Multi-color LED Status Display> Wiegand 26/34 bits input automatic identification