> Card type: EM Card> Waterproof, conforms to IP66> One relay, 1000 users> 3 access modes: Card, PIN, Card + PIN> Card type: 125KHZ EM card> PIN length: 4~6 digits> Wiegand 26 bits input & output> Facility code programmable> Latch mode to hold door or gate open
>Working current: 120mA/240mA>Safety type: power on to close the door and power off to open the door>Maximum pull: 60kg linear pull
>Sensing distance: 30mm>Switch form: NO-Normally Open/NC-Normally Close/NO+NC>Electrical parameters: maximum power 10W, working voltage 100VDC, working current 500A
> Input Voltage: AC180-235V> Input Frequency: 50Hz> Output Voltage: DC12V; NO/NC> Output Current: 5A
> Glass Thickness 10-15mm> Opening Mode 90 Degree Door> Finished for Shell Anodized aluminum> Compatible with EL-600series 280KG only
> Without Signal Output> Current Draw: 12V/480mA 24V/240mA> Voltage: DC12V or DC24V> Holding Force: 350KG (800Lbs)> Lock Size: 273Lx44Wx27.5H(mm)> Armature plate: 180x45x11(mm)
> Card type: EM Card> One relay, 1000 users> Wiegand 26~37 bits input & output> Pulse mode, toggle mode> 2pcs device support interlock for two doors> With Bluetooth, APP configuration
> NFC RFID Access Control Reader> Material: Acrylic panel> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator
> Door Weight: 20-45KG> Material: Aluminum alloy> Door Width: 800mm> Dimensions: 145x57x37mm
> Standard Structure: Stainless steel, Wire Drawing Finished> Suitable for Door: especially for glass door frameless below> Opening Mode: 180 °Degress Door> Use with: BL-2001 Series> Finished for Shell: Stainless steel Wire Drawing> Size: 93×47×38mm
>Input voltage (receiver): AC/DC12V-30V>Hand holder power supply: 3V (2 3V button batteries, powered in parallel)>Battery Life: An average of 200 compressions per day for 190 days
> Material: Zinc alloy case> Size: 105x50x20mm> WG26 input and output> Door opening timeless than 0.1S
Fine iron electro plating> Holding force: 220lbs (110KG)> Voltage: 12V or 24V
> Structure: IMD, super wear resistant> Instruction push: Real time message> Data trsnsmission: TCP/IP> Reading: Fingerprint/Staff card> Fingerprint: Optical. 255cs> Screen: 2.4' TFT screen
>Working voltage: 12>Working current: 12V>Material: Copper wire
> Frequency: 860~960MHz> Protocol: ISO18000-6C EPS CLASS1 GEN2> Size: 73.5x21.2mm
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
