RFID Locker Access Control board to control 20-40pcs locks, built-in TCP/IP with free software to manage users. Support RFID/Pincode/Face/Finger to access

> Material: Aluminum alloy> Dimensions: 200x43x28mm

>Dimensions:115Lx70Wx21H(mm)>Operating Voltage:DC9-DC12V>Relay:NO/NC/OM

> Power supply: 12V 23A battery> Working current: ≤3uA (static), ≤10mA (alarm)> Magnetron distance: 10mm> Transmit frequency: 433MHz

> Card type: 125KHz or 13.56MHz Card> PCD-100A EM: 125KHz (WG26 output)> PCD-100A Mifare: 13.56MHz (WG34 output)

>Memory capacity:1000 user's card ,With management card>Working Power:DC6V 4X 5# Battery(Not Include) OR 12VDC electric power >Working Current:<350mA>Static Current:25mA>Unlocking time:<1S

>Working voltage: 12>Working current: 12V>Material: Copper wire

> Material: ABS+Stainless steel> Size: Diameter 16.25*5.89mm> Thickness: 5.89mm> Chip avaible: RW1990 / TM1990A-F5> Function: Read and write (RW1990); Only read (TM1990)

> NFC RFID Access Control Reader> Material: Acrylic panel> Wiegand 26/34 output> Dimension: 86x86x8mm> Voltage: DC9~15V> Working Frequency: 125KHz & 13.56MHz> Working Indicator: Beeps and LED Indicator

> Card type: 125KHz or 13.56MHz Card> RF007EM: 125KHz (WG26 output)> RF007Mifare: 13.56MHz (WG34 output)

> AC Input Voltage: AC90-250V 50/60Hz> Rated Output Power: 75W>. Output Current Range: 12V 5A> Waterproof IP67

> Face Plate: 150×43×39mm> Bolt: 17mmDIA, stainless steel 13mm throw> Timer: 0 / 3 / 6 seconds available to set> Signal Output: Door Status Output, NO/COM> Suitable For: 12~15mm Electric Bolt For Fully Frameless> Open Left or Open Right (Choose One)

> Card Type: MF or MF Card> Waterproof degree: IP65> Capacity: 1000 user> Working frequency: 125KHz or 13.56MHz> Wiegand Input and Output

> Card type: EM, HID, MF Card> Waterproof conforms to IP66> One relay, 600 users> PIN length: 4~6 digits> Wiegand 26~37 bits input & output> Can be used as a Wiegand reader with LED & Buzzer output> Pulse mode, Toggle mode> 2 devices can be interlocked for 2 doors> 12~28V AC/DC> Card type: 125KHz EM card,125KHz HID card, and 13.56Mhz Mifare Card

Input voltage: AC 100~240V 50/60HzOutput voltage: DC12V 2AMaterial: ABS plasticDC interface: 5.5x2.1

> Input Voltage: AC180-235V> Input Frequency: 50Hz> Output Voltage: DC12V; NO/NC> Output Current: 5A

> Input Voltage: AC110-240V> Output Voltage: 12VDC/3A> Time Delay: 0-15S

> Specification: Single head lock> Material: Iron+copper> Unlock voltage: 12V

> Card type: EM Card> Metal case, embedded design> Waterproof lP66> User capacity: 2000 users, standalone> Pulse mode, toggle mode> Built in LDR for anti tamper> Wiegand 26/34 bits input automatic identification

>voltage: 110V-220 (V)>Power supply method: The transmitter uses batteries and the receiver AC>Power consumption: ＜10m(W)