>Sensing distance: 15-25mm>Switch form: NC-Normally Close>Electrical parameters: maximum power 10W, maximum voltage 100V, maximum current 0.5A
Signal Output: door open or door close state detectionwith output point, NC/COM
> Card type: EM Card> Access ways: Card, code, card + code, Mobile APP> Protocol: Wiegand26 Input/Output> Searching time: Less than 0.1s after reading card> Backlight keypad: Easy to operate at night
> Relay: NO NC COM> User Capacity: 1000users> Working Voltage: 9-24V> Support Wiegand 26-37bits output> APP download is available for Android only> APP name: Ksmart
>type: wall-mounted>Air pressure:86~106Kpa>Working temperature: 0~55 ℃
> 999 users, user data can be transferred> Multi-access modes: Card, Card or PIN, Card with PIN and multi Cards/PINs> Can connect with any reader with Wiegand 26~44, 56, 58, 64 bits output> Can connect with any keypad reader with 4bits, 8bits (ASCII) output> 12~28V AC/DC power input, 12V DC output> Can connect with external alarm and door contact
> Door open: Finger/Pincode/MechancialKey> Door thickness: 40mm-120mm available> Working Voltage: 4pcs lithium battery> Finger Capacity: 300pcs> Lock body: SUS 304 stainless steel> Built in USB> Working temperature: -30°~ 50°range
> Card type: 125KHz or 13.56MHz Card> KR100EM: 125KHz (WG26 output)> KR100Mifare: 13.56MHz (WG34 output)
> Metal Case, anti-vandal> Waterproof, conform to IP66> Card Type: 125KHz EM & HID Cards/Fobs> Wiegand Format: Wiegand 26 default> Keypad Transmission: 4 bits> Reading range: 4~8 cm
> Card type: EM or EM+HID Card> Metal case, anti-vandal> One Programming relay output > Multi-color LED Status Display > 1000 Users: 100 Fingerprint, 890 Card, 10 Visitor User> Integrated alarm & Buzzer output> Capacitive Fingerprint Sensor
> Built in LED, door sensor and time delay> Holding force: 350KGx2 (800LBSx2)> Voltage: DC12V or DC24V> Current Draw: 12V/480mAx2 24V/240mAx2> Lock Size: 500Lx55Wx28H(mm)> Armature plate: 190x45x11(mm)
Work with all Kind of Single & Double Smokeproof Doors> Dimensions: 50x65x90mm> Holding Force: 60kg(110Lbs)
> Card type: MF Card> Waterproof conforms to IP66> One relay, 1000 users, standalone> Pulse mode, toggle mode> Built-in LDR for anti-tamper
> Without Signal Output> Voltage: DC12V or DC24V> Holding Force: 180KG(350Lbs)> Lock Size: 170Lx41Wx21H(mm)> Current Draw: 12V/300mA 24V/150mA
Double door RS485 access Control board with free software to manage userscontrol 2doors, support 2pcs RFID access reader and 2pcs exit button or 4pcs reader for in and out
> Card type: EM or MF Card> Metal case, anti-vandal> Digital backlit touch keypad> Multi-function standalone access controller and reader,> WG interface: WG26 Input / output> Capacity: 2000 cards / codes> Three accesses: card, pin, card + pin