SPECIFICAION | |||||
MODEL | SMT-012-200VW | SMT-024-200VW | SMT-036-200VW | ||
OUTPUT | DC VOLTAGE | 12V | 24V | 36V | |
RATED CURRENT | 16.67A | 8.33A | 5.55A | ||
CURRENT RANGE | 0~16.67A | 0~8.33A | 0~5.55A | ||
RATED POWER | 200W | 200W | 150W | ||
RIPPLE&NOISE(max) | 150mV | 150mV | 150mV | ||
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | ±0.5V | ||
SETUP RISE TIME | 80ms/110VAC, 220VAC | ||||
HOLD UP TIME(Typ.) | 60ms/110VAC, 220VAC | ||||
INPUT | VOLTAGE RANGE | 90~265VAC | |||
FREQUENCY RANGE | 50~60Hz | ||||
POWER FACTOR(Typ.) | >0.95@110VAC ; >0.98@220VAC | ||||
EFFICIENCY(Typ.) | ﹥91% | ||||
AC CURRENT(Typ.) | 2.10A@110VAC; 1.01A@220VAC | ||||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
Overload | overload protected@145-160% above peak rating | ||||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |||
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(EMC,LVD),IP67 | |||
WITHSTAND VOLTAGE | I/P-O/P:3.0KVAC IP-GND:3.0KVAC | ||||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. |
|||||
3.Tolerance:includes set up tolerance,line regulation and load regulation. | |||||
Label |
|
|
|
|
|
|
Specifications
2. Input: 90-135/170-265vAC / 47-63HZ
Features
Environment
Safety
Applications
* Vehicle Lights Controller Panels,etc.
packing
Our Factory