70KHZ Digital Ultrasonic Generator For Samrt Card Bank Card ID Card Embedding
Specifications:
Model |
HS-DG-70 |
Frequency |
70 KHz |
Power |
100W |
Power adjusting |
Itermittent or continuons |
Power cord |
5 meters |
Cooling method |
Compressed air |
Working time control |
0-999 seconds |
Outer housing |
Aluminum |
Competitive Advantage:
★ Steady welding point, completely eradicate insufficient solder technically.
★ The size of welding spots is the same, equality line, good effect on uniformity.
★ The welding spot is small, wouldn’t increase the weight of the coil, easy to do lamination and encapsulation.
★ To leave out the immersion tin step before doing welding, save an operator.
★ After skilled in welding, much faster than the way to use searing iron to do weld.
★ On the process on manufactory, there is no waste gas, waste rubbish on pollution, runs in quiet and no noise.
★ To select the frequency 60KHz, one machine could drive 5-10 ultrasonic products, the speed to do welding is much faster.
★ Low power consumption, to save production cost for manufactory enterprise.
|
Analog generator |
Digital generator |
Circuit |
Analog circuit, discrete components |
Digital circuit, the chip control |
Automatic search |
× |
● |
Automatic frequency tracking |
× |
● |
Frequency adjustment range |
±0.15 KHz |
±0.5 KHz |
Power regulation |
× |
● |
24 hours of continuous work |
× |
● |
Non resonant condition |
× |
● |
LCD |
× |
● |
Add the PLC protocol |
× |
● |
Automatic circuit protection |
Bad, easy to cause the damage of components |
Good |
Repair method |
Professional repair |
Module replacement |