The 40G QSFP+ BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-haul data communications and interconnect applications using multimode fiber (MMF). It enables customers to reuse their existing 10Gb duplex MMF infrastructure to migrate to 40 Gigabit Ethernet connectivity.
40GBASE-SR Bi-Directional QSFP28 850/900nm 100m DDM LC MMF Optical Transceiver Module Supplier
·The QSFP-40G-SRBD transceiver internally multiplexes the XLPPI 4x10G interface into two 20Gb/s electrical channels, using bi-directional optics to transmit and receive each channel over a single simplex LC fiber. This allows for a total bandwidth of 40Gbps over duplex LC cable. this allows for the reuse of installed LC duplex cabling infrastructure for 40GbE applications.
·The QSFP-40G-SRBD is a quad-channel, LC-duplex, pluggable, fiber optic QSFP+ transceiver for 40 Gigabit Ethernet applications. It consolidates four electrical data channels in each direction onto a single LC duplex fiber optic cable for transmission. The transceiver is a high-performance module for short-range duplex data communications and interconnect applications. Each electrical channel operates at 10.3125 Gbps and is compliant with the 40GE XLPPI interface.
·Link distances are up to 100 meters using OM3 fiber and up to 150 meters using OM4 fiber. The modules operate on a multimode fiber system with a nominal wavelength of 850 nm at one end and 900 nm at the other. The electrical interface uses a 38-contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector. The module uses proven integrated circuits and VCSEL technology to provide reliable long life, high performance and stable service.
Features
·Utilizes standard LC duplex fiber optic cable, allowing reuse of existing cable infrastructure
·Up to 100 meters with OM3 fiber links and up to 150 meters with OM4 fiber links
·Runs at 10.3125 Gbps per electrical channel with 64b/66b encoded data
·Two-wire serial (TWS) management interface with shieldable interrupts, scalable functionality
·Power Level 4: 3.5W maximum power
·Class 1M eye safety
·High port density: 21 mm horizontal port spacing
·Hot-swappable transceiver for easy installation and maintenance
·+10 to +70ºC enclosure temperature operating range
·Compliant with QSFP+ SFF-8436 specification
·IEEE 802.3ba-2010 compliant 40GbE XLPPI electrical specification
Order information
Product Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Reach (m) |
LD |
Tx Power (dBm) |
PD |
Rx Sens (dBm) |
Temperature (℃) |
QSFP-40G-SRBD |
40 |
850/900nm |
100M for OM3 150m for OM4 |
VCSEL |
-4~ 5dBm |
PIN |
<-7.5dBm |
10~70 |