20-110mm PE PPR pipe extrusion line is WONPLUS advantage machinery, the high speed line can reach 25-30m/min, help customer to get a high output production line with lower energy consumption. According to different required, the line can make multi layer pipe of PPR or HDPE, the structure could be AB, ABA, ABC etc.
Equipment composition:
Single Screw Extruder + Co-extruder + Pipe Mould + Vacuum calibration tank + Water spraying cooling tank + Two pedrail Hauler + Dust-free Cutter + Coil winder or stacker.
Machine Advantage:
● High output and stable running performance.
● PLC automatic control system and HMI touch screen control panel.
● Adopt the most advanced spiral or basket die structure design.
● Haul-off machine with Servo motor driven, more stable and bigger range of speed adjust.
● Dust-free cutter (fly knife or planetary cutter), applied to PE pipes with different diameter range.
● Reliable performance, high production efficiency.
Technical Parameters:
Extrusion System |
|||||||||
Extruder |
Model |
L/D |
Driven Motor |
Rotary Speed |
Capacity (kg/h) |
||||
Single screw extruder |
SJ-60/36 |
36:1 |
90kw |
187rpm |
250-300 |
||||
Downstream Equipment (20-110mm) |
|||||||||
Vacuum calibration tank 1 set |
Spraying cooling tank 2 sets |
Hauler |
Cutter |
Coil winder |
|||||
Length: 6000mm |
Length: 6000mm |
Two pedrail type |
Dust-free |
Single/double station |
|||||
Vacuum pump: 4kw*1set |
Water pump: 4kw*1set |
Servo motor 0.85kw*2sets |
Cutting power: 1.5kw |
||||||
Water pump:4kw*2sets |
0-25m/min |
Machine Application:
The line is mainly used to produce the pipe which raw material is HDPE PPR resin. It is also suitable to produce pipe material of PP, PPH,PC resin and so on.