Product introduction: This 1K Base Coat Car Paint Purple Blue Car Paint Deep purple blue, blue front, reddish side, purple blue
Model NO. | P-115 | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | Meklon | HS Code | 320820 |
P-1K 115 Car Refinish Automotive Paint
Product Features: 1K Base Coat Car Paint Purple Blue Car Paint It is composed of a variety of weather-resistant resins with high quality and strong covering power.It
can be formulated into one component base paint with various plain colors, metal effects and pearl effects, and has excellent interlayer adhesion.
Applicable Substrate: 1K Base Coat Car Paint Purple Blue Car Paint After sanding, completely dry old paint layers and painted surfaces in the Ferrari range, etc.
1K Tinters
Features: We have medium concentration to high concentration car paint. They have excellent covering power, metallic effect, and it is easy spraying.
Mixing Ratio: (volume ratio)
2K paint | hardener | thinner |
2 | 1 | 0.3-0.5 |
1K paint | thinner |
1 | 1-1.2 |
Spraying: wet spray for two to three layers, the flash-off time between layers is 5-15 minutes.
Package: 1L *12, 1L *6, 4L *4
Storage Period: At 20 ℃ with original sealed, can store more than 18 months.
Note: If spray a large area, we recommend adding 5% hardener, then spray varnish.
SURFACE PREPARATION:
1. Surface Should Be Clean And Free Of Dust, Grease And Oil.
2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
Temperature& mixed |
Temperature |
Clear Coat |
Activator/ Hardener |
Thinner |
Temperature& mixed |
<15℃ |
Clear Coat |
Fast Dry Activator |
Fast Dry Thinner |
Temperature& mixed |
15-25℃ |
Clear Coat |
Standard Activator |
Standard Thinner |
Temperature& mixed |
25-35℃ |
Clear Coat |
Slow Dry Activator |
Slow Dry Thinner |
Mixing Ratio |
|
2 |
1 |
0.3-0.5 |
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suction Spray Gun)
Spraying Pressure: 3-4 Bar.
Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)
Number Of Coats: 3 Coats Maximum.
Drying Time |
Temperature |
Dust Free |
Tack Free |
Complete Dry |
Drying Time |
20℃ |
1h |
2-3 hours |
24h |
Drying Time |
60℃ |
5 minutes |
10 minutes |
60 minutes
|
Customer Feedback